Motion Sensor/Transmitter for Rodann Driveway Entry Alert, TX-2000A

The outdoor weatherproof transmitter unit that can be either side or overhead mounted. A 9V replaceable battery is included and is already installed for your convenience. In the back of the unit there are six dip-switches. Numbers 1-4 control the communication security codes that must match the receiver. Numbers 5 & 6 on the transmitter identifies which of up to 4 transmitters (zones) is sending a driveway motion alert. There is an antenna that can rotate for optimal transmission to the receiver up to 1000" (LOS) or 600" recommended. The driveway beam projection at 25 feet is 1 foot square and at 50 feet it is 2 feet square. #AreaMotionActivation, #EntryWay https://www.entryalertproducts.com/product/motion-sensor-transmitter-for-rodann-driveway-entry-alert-tx-2000a/

Portable Receiver / Pager, Dakota PR-2500

Size 2.5” x 1.25” x .75“
Weight 2.1 oz without battery
Frequency 433.92 MHz
Code Combinations 256
Zones 4
Alert Methods Silent, vibrate, and audible
Memory up to 999 events per channel
Lithium Ion rechargeable battery
Battery charger included

Pager Product Instructions https://www.entryalertproducts.com/product/dakota-alert-pager-pr-2500/

Receiver for the Rodann Entrance Alert Set, RX-1000A

Extra Receiver for the Rodann® Entrance Alert Set, RX-1000A.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206. #AlarmSystem, #EntryAlerts https://www.entryalertproducts.com/product/receiver-for-the-rodann-entrance-alert-set-rx-1000a/

Motion Sensor / Transmitter, Skylink HA-434TL

• Alerts you when motion is detected surrounding your garage, home or business.


• Supervised Sensor: monitors the sensors and their battery condition automatically.


• Motion detecting range: 40 feet.


• Operating range: up to 800 feet line of sight.


• Easy to set up.


• FCC/IC approved.


• One year warranty.

#MotionSensor, #OutdoorMotionSensor https://www.entryalertproducts.com/product/skylink-alert-motion-sensor-ha-434tl/

Door / Window Sensor, Wireless Long Range, WD-434TL

Magnetic type contact sensor. Notifies you when your door or window is open. Supervised Sensor: monitors the sensors and their battery condition automatically. Lithium battery included. Operating range: 800 feet. Easy to set up. FCC/IC approved. One year warranty.

#DoorAlarm, #WindowSensor https://www.entryalertproducts.com/product/door-window-sensor-long-range-wd-434tl/

Motion Sensor / Transmitter for the Rodann Entrance Alert, TX-1000A

Extra Motion Sensor / Transmitter for the Rodann Entrance Alert, TX-1000A. #MotionDetector, #MotionSensor https://www.entryalertproducts.com/product/sensor-transmitter-for-the-rodann-entrance-alert-tx-1000a/

Wired 8 ohm Speaker for Rodann Alert wireless Receivers

Additional wired Speaker for Rodann Alert wireless Receivers, RX-1000A and RX-2000A. #AlarmSystems, #WeatherProofSpeaker https://www.entryalertproducts.com/product/additional-wired-speaker-for-rodann-alert-wireless-receivers/

Siren Mini Piezo, 12VDC

Mini Piezo 12 VDC Siren has similar sound to a domestic smoke alarm. Piercing 105 dbA mini siren simply connects to the, 12 Volt output of any Receiver or can be used on the relay output of an Alert receiver (requires 500 ma adapter item 60-301 if used on the relay output). #AlarmSystems, #Siren https://www.entryalertproducts.com/product/siren-mini-piezo-12vdc/

Optex Wireless 1000 Door Contact / Wireless Transmitter, TC-10U

The Optex Wireless 1000 (TC-10U) Door Contact / Wireless Transmitter is designed for indoor and outdoor use (not in direct rain). It can be installed on doors and windows. This Contact / Transmitter features a low battery signal and is powered by a CR123 - 3V lithium battery.

The TC-10U is a battery-powered door / window contact and wireless transmitter for the RCTD-20U (Wireless 2000). When used as a wireless transmitter and installed in the backbox of any of OPTEX"s battery operated detectors, extended detection range and wireless notification to your RC-20U chime box is achieved. Instantly monitor larger areas with minimal false alarms for a greater sense of protection. When used as a door contact, the TC-10U will send a signal to the RC-20U receiver chime box. This gives the user a notification when the door is opened, and is perfect for high traffic areas around entrances where an above door sensor is not practical.

Features

• Can be installed on Door/Window


• Weather proof structure (not rain proof)


• Over 8 million wireless codes possible (eliminates interference)


• Low battery signal

#AlarmSystems, #WirelessTransmitter https://www.entryalertproducts.com/product/optex-wireless-1000-door-contact-wireless-transmitter-tc-10u/

Long Range Wireless Door Entry Alert, UTDCDCR-2500

The Door sensor/transmitter has a magnetic door contact, so that when the door is opened by a visitor / customer, it sends a wireless entry alert chime to the DCR-2500 receiver (which is power by an AC adapter and can be plugged in up to 2500 feet away (depending on walls, building materials, etc.). The wireless sensor/transmitter also has a push button that can be used as a panic button, pager signal or a wireless doorbell. There is also terminals for both a normally open (N/O) and/or normally closed (N/C) input. These inputs can be used with any sensor contacts. Now you can have your favorite sensor send a wireless signal up to 1/2 mile back to the DCR-2500 (item 60-609) receiver, depending on environment and terrain.

The DCR-2500 is the receiver for this Long Range Wireless Door Entry Alert. It has four form “C” relay outputs and one 12VDC output. The output durations are adjustable up to 10 minutes. The receiver will play one of four different tunes that are selected at the transmitter so that different zones can be distinguished. The receiver is powered by a 12VDC transformer. It also offers a 5 minute exit delay so you can leave the house without disturbing any occupants as well as a reminder beep and counter function.

System includes quantity 1 (NC) normally magnetic door contact for more difficult installations and/or where the UT-2500 transmitter cannot be mounted on door frame (this 12" wired contact would optionally replace the contact included with transmitter). Up to 4 total wireless long range door contact transmitters can be added, see item 00-211.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

Product Demonstration Video:



What"s Included:
- Qty 1: Wireless 4 zone, chime selectable, relay output Receiver
- Qty 1: Long range transmitter and built-in magnetic door contact
- Qty 1: NC magnetic contact w/12" wire leads - may not be needed

What may be required:
- additional wire; depending on your installation.
- wire connectors - screw-on, butt, crimp, telephone/data/splice, or solder, insulating tape, etc.

Sensor/Transmitter Instructions

Receiver Instructions

Addendum to Instructions #DoorAlarm, #EntryAlerts https://www.entryalertproducts.com/product/long-range-wireless-door-entry-alert-utdcdcr-2500/

Siren Mini Piezo, 12VDC

Mini Piezo 12 VDC Siren has similar sound to a domestic smoke alarm. Piercing 105 dbA mini siren simply connects to the, 12 Volt output of any Receiver or can be used on the relay output of an Alert receiver (requires 500 ma adapter item 60-301 if used on the relay output). #AlarmSystems, #Siren https://www.entryalertproducts.com/product/siren-mini-piezo-12vdc/

Entrance Alert Set, Rodann, TX/RX-1000A

The "RX-1000A & TX-1000A Wireless Door Chime Set" is a highly versatile passive infrared (PIR) door announcer that senses the infrared emitted by a person or object crossing through its field of view. The RX-1000A & TX-1000A wireless door chime operates without reflectors or light beam projectors and therefore is immune to false alerts caused by transient light. You can use with door opened or closed. The RX-1000A & TX-1000A Wireless Door Chime is battery powered and does not require electrical wiring. This unique PIR makes the RX-1000A & TX-1000A wireless door chime set the best solution for virtually any installation. It can also be used on warehouse roll up doors, inside display cabinets, restricted area protection, or (patio, bedroom, bathroom) window alerting device.

Additional Receivers RX-1000A and/or Sensor / Transmitters TX-1000A may be added! Receiver RX-1000A (item 25-303) and Transmitter (item 25-304)
An additional wired speaker can be also added to the wireless receiver; it"s item number is 25-405

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

Product Demonstration Video:

 

• Detects any Motion


• Infrared Sensor


• Wireless - Simple Installation


• Receiver has a volume control and plugs into a wall outlet anywhere up to 500" of the transmitter.


• Receiver uses 110 Volts


• Transmitter is battery powered


• 100% tested at the factory


• No Reflectors


• No Light Beams


• No False Alerts from transient light


• Up to 500 Foot wireless alert signal transmission Range


• Remote Receiver with Volume Control operates on 110V AC


• Alerts you with a pleasant electronic chime tone-four sound options


• Not affected by wind, heat, humidity or shadows


• Counters available

  #EntryWayAlert https://www.entryalertproducts.com/product/entrance-alert-set-rodann-tx-rx-1000a/

Whistle Alert, Electronic, 12VDC

Mini Whistle for annunciation in remote areas, simply connects to a 12 Volt output of the any Alert Receiver or requires a minimum 500 ma adapter (60-301) if used on the relay output of a receiver. 0.87" diameter x 0.37" high.

The whistle can also be installed in any alarm or doorbell system that uses 2-strand doorbell wire. When activated, it sounds a loud whistle for approximately 4 seconds.

• Sounds loud whistle for 4 seconds when activated


• Red and black leads connect to 12VDC output

#AlarmSystems, #WhistleAlert https://www.entryalertproducts.com/product/whistle-electronic-12vdc/

Long Range Wireless Point to Point Entry Alert - Single Photobeam up to 50 feet

Wireless remote (up to 1500 feet; line of sight transmission distance) entry way alert or alarm is activated when person or object passes through the invisible line between the photobeam (single) sensor (transmitter) and receiver. Single photobeam requires power at each end of invisible beam (power adapters included). Separation of photobeam units can be from 3 feet up to 90 feet. Photobeam Sensor Receiver must be wired to 3vdc CR2 battery powered wall-mountable long range transmitter and included 12vdc adapters (instructions included). Transmitter settings allow one of four tones/chimes to be sent wirelessly up to 1500 feet (line of sight) away to Audible alert receiver with on/off switch and volume control. Chime selection (Classical, Westminster, Ding Dong, Whistle) only sounds twice when something passes through invisible IR beam. Multiple entry ways can be monitored with additional sensors ( item 80-400 ), power supplies ( item 60-300 ) and transmitters ( item 60-105 ). The additional entry ways can be set to individual unique chime settings if desired. Multiple wireless wall/desk receivers ( item 60-609 ) may be used with single or multiple entry transmitters.

When the receiver gets a signal from the transmitter one of 4 different tones (Classical, Westminster Chime, Ding Dong, Whistle) will sound for a few seconds. There is also a volume control so you can set the sound to the desired level. The receiver is also equipped with 4 (one for each zone) NO/NC (24vdc @ 3amps) relays and one 12 VDC (400mA max.) output terminal that can activate when a signal is received. The receiver can be user programmed so the 12VDC terminal and relays will activate for 1 second, 10 seconds, 60 seconds or 10 minutes. The tones will sound for several seconds.

Transmitters/receivers can be set to one of 256 frequency settings to avoid interference with nearby retailers using same system.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

What"s Included:

- Qty 1: Wireless 4 zone, chime selectable, relay output Receiver
- Qty 1: Single Photobeam Sensor - sender (transmitter) & receiver require power - up to 50 foot separation
- Qty 2: 12vdc 500ma transformer for Single Photobeam
- Qty 1: Long range transmitter
- Qty 1: 5 feet+, 2 conductor wire for wireless transmitter

What may be required:

- additional wire; depending on your installation.
- wire connectors - screw-on, butt, crimp, telephone/date/splice, or solder, insulating tape, etc.

Wireless Receiver Instructions

Long Range Transmitter Instructions

Single Photobeam Sensor, 50 feet max.

Addendum to Instructions

NOTE: This system is NOT plug"n play installation. Low voltage wiring required (click here for instructions included), product set-up, interconnect and mounting required*.

* Wire cutting, wire connecting, additional wire, wire connectors, screw drivers (all available at Home Depot, Lowes, Radio Shack, etc.) may all be required depending on your specific installation. This is all low-voltage wiring; however some people may require the services of an electrician, or someone with data/video/audio/telephone/tv wiring experience for proper installation.

Here are the specific instructions on how to interconnect all the items; we will only take returns on this system package (or pieces of it) if they are returned in brand new condition or a specific item is defective and needs replacing. #AlarmSystems, #EntryAlerts https://www.entryalertproducts.com/product/long-range-wireless-point-to-point-entry-alert-single-photobeam-50-feet/

Entry Way Alert Set. For outdoor or driveway applications, Rodann, RX/TX-2000A

Both transmitter and receiver have antennas that allow 360 degree rotation and pull away from sides of boxes. For best results in communication between transmitter and receiver it is ideal for the antennas to be on the same plane. Example: (If one antenna is pointing up in the vertical position, then the other antenna should be pointing up also. If one antenna is in the horizontal position, then the other antenna needs to be horizontal and pointing at each other for optimum reception). When it comes to distance in communication between transmitter and receiver environmental condition need to be considered. Line of sight without obstacles is ideal. Every tree, bush, fence, car, building in direct line of sight will reduce communication between units. These units should give you approximately 1000’. You may also add additional transmitters to one receiver or additional receivers to one transmitter.

 

TRANSMITTER
The outdoor weatherproof transmitter unit that can be either side or overhead mounted. A 9V replaceable battery is included and is already installed for your convenience. In the back of the unit there are six dip-switches. Numbers 1-4 control the communication security codes that must match the receiver. Numbers 5 & 6 on the transmitter identifies which of up to 4 transmitters (zones) is sending a driveway motion alert. There is an antenna that can rotate for optimal transmission to the receiver up to a realistic 1000 feet away. The driveway beam projection at 25 feet is 1 foot square and at 50 feet it is 2 feet square.

Additional wireless Sensor /Transmitters may be added (item 25-404).
RECEIVER
The indoor receiver has a plug-in 12VDC power supply with a 6 foot cord. The receiver may be placed on a counter top, table or hung on the wall. The electronic LED counter feature allows you to either count customers or count unexpected visitors / vehicles moving in your driveway. There is a reset button next to the counter, when pressed it will zero out the counter. This unit also has six dipswitches on the back of this unit. Numbers 1-4 must match transmitter. Number 5 controls the output of the 12VDC terminals on the back of the receiver with a one second or five second 12VDC output, Number 6 is not used. The terminal screws on the receiver back give you the option of adding a bell, buzzer, horn, siren, strobe or anything that is 12VDC operated. The other speaker terminal (SPKR) screws allow you to add an auxiliary speaker via a wire connection to get the same “Ding Dong” sound as the receiver. A volume control knob adjusts volume on receiver and auxiliary speaker and a different tone is generated depending on which transmitter (zone) is activated. For optimal reception the antenna will swivel 360°.

Additional Receivers: wireless (item 25-403) or wired (item 25-405) may be added.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

Product Instructions #DrivewayAlert, #EntryAlerts https://www.entryalertproducts.com/product/entry-way-alert-set-rodann-rxtx-2000a/

MACE Motion Alert Motion Detector With Security Alarm, M80200

Motion activated alarm and door chime. Dual-purpose passive infrared alarm detects movement in any selected area. Two modes of operation allows it to function as a door chime and also a 110 dB alarm. The door chime is useful for alerting you of someone’s presence. The alarm’s programmable keypad offers added security since you will have control over the access code. Adjustable sensor head rotates so you can selectively choose the area covered. A low battery indicator tells you when the battery needs to be replaced. Comes with complete mounting kit and instructions. 9 volt battery (sold separately). #AlarmSystem, #MotionDetector https://www.entryalertproducts.com/product/mace-motion-alert-motion-detector-with-security-alarm-m80200/

Long Range Wireless Door Contact, UTDC-2500

Additional Magnetic Door Contact and Long Range transmitter for (item 00-210), Wireless Remote Door Entry Alert (UTDCR-2500) #EntryAlerts, #WirelessTransmitter https://www.entryalertproducts.com/product/long-range-wireless-door-contact-utdc-2500/

Wireless Remote Entry Way Alert Chime System w/ 35 feet Beam

Wireless remote chime (up to 2000" line of sight transmission distance) entry way alert is activated when person or object passes through or across IR invisible beam. Beam sensor is powered by 12vdc adapter (included) on one side and by non-powered reflector on other side of entry way (separation of sensor and reflector can be from 1 foot up to 35 feet). Reflective Beam Entry Way Sensor includes 6" of cable and must be wired to 9V battery powered wall-mountable transmitter and included 12vdc adapter (instructions included). Transmitter settings allow one of four tones/chimes to be sent wirelessly up to 2000 feet (line of sight) away to Audible alert receiver with on/off switch and volume control. Chime selection (Classical, Westminster, Ding Dong, Whistle) only sounds twice when something passes through invisible IR beam. Multiple entry ways can be monitored with additional sensors ( item 80-403 ), power supplies ( item 60-300 ) and transmitters ( item 60-105 ). The additional entry ways can be set to individual unique chime settings if desired. Multiple wireless wall/desk receivers ( item 60-509 ) and or pagers ( item 60-103 ) may be used with single or multiple entry transmitters. Included receiver allows external sounders or accessories to be wired via a 12vdc output (400mA for selectable 4 seconds or 10 minutes) on channel/zone 1 and NO/NC relays (24vdc @ 3amps) for each of 4 channels/zones. Transmitters/receivers can be set to one of 256 frequency settings to avoid interference with nearby retailers using same system.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

Accessory power output (for each channel or the 12vdc output) can be increased with an optional 500mA or 1amp 12VDC adapter and/or the output duration time of any of the 4 individual NO/NC channel relays or the 12VDC output can be delayed or extended from 1 second to 60 minutes with the optional Programmable Relay Timer Module - (item 60-440).

Receiver Instructions

Transmitter Instructions

Reflective IR Beam Sensor Instructions

Addendum to Instructions

NOTE: This system is NOT plug"n play installation. Low voltage wiring required (click here for instructions included) and product set-up and mounting required. #ChimeAlert, #EntryAlerts https://www.entryalertproducts.com/product/wireless-remote-entry-way-alert-chime/

Electronic Sounder, Extra Loud Siren or Steady Tone Option

This extra loud sounder puts out 90dB at 12VDC drawing only 400mA. Yelp (Siren) or Steady output can be chosen. This item is a great addition to items 00-200, 60-509, 60-609, 60-620, 20-303, 25-302, 25-303, 60-700, 60-740, 25-402, 25-403 when used in industrial manufacturing areas with a lot of background noise. 12VDC, 400mA, 90dB Negative 12vdc input goes to either one of the Black wires. Positive 12vdc input goes to either one of the Yellow wires for Steady Tone or either one of the Red wires for siren. #AlarmSystems, #ElectronicSounder https://www.entryalertproducts.com/product/electronic-sounder-siren-or-steady-tone-option/

Motion Sensor / Transmitter for the Rodann Entrance Alert, TX-1000A

Extra Motion Sensor / Transmitter for the Rodann Entrance Alert, TX-1000A. #MotionDetector, #MotionSensor https://www.entryalertproducts.com/product/sensor-transmitter-for-the-rodann-entrance-alert-tx-1000a/

Entry Alert Invisible Beam System With Chime, Seco-Larm

Safety sensor for garage doors
Overhead doors security sensor
Entry detection for store front

• Safety sensor for garage doors


• Overhead doors security sensor


• Entry detection for store front


• Other applications: offices, schools, warehouse, vehicle detection, etc.


• Retro-reflective design.


• Range: Up to 22 feet (7m)


• Perfect for monitoring an entrance or use as an entrance indicator.


• Will make "ding-dong" sound or siren sound when the beam is interrupted.


• Speaker volume can be adjusted or turned off.


• When in siren mode, sounding time is adjustable from 3 to 30 seconds.


• 9VDC adapter included.


• Cable (w/plugs) wire length is 33 feet (distance between sensor & speaker).


• All components plug into each other. No hard wiring required.

Includes the following:
- NIR retro-reflective sensor.
- Reflector.
- Speaker.
- 9VDC 200mA output adapter.

WIRELESS version of above unit now available: item 80-550

Product Info Sheet

Instructions #DoorAlarm, #EntryAlerts, #EntryMotionSensorDetection https://www.entryalertproducts.com/product/entry-alert-system-with-chime-seco-larm/

Motion Sensor/Transmitter for Rodann Driveway Entry Alert, TX-2000A

The outdoor weatherproof transmitter unit that can be either side or overhead mounted. A 9V replaceable battery is included and is already installed for your convenience. In the back of the unit there are six dip-switches. Numbers 1-4 control the communication security codes that must match the receiver. Numbers 5 & 6 on the transmitter identifies which of up to 4 transmitters (zones) is sending a driveway motion alert. There is an antenna that can rotate for optimal transmission to the receiver up to 1000" (LOS) or 600" recommended. The driveway beam projection at 25 feet is 1 foot square and at 50 feet it is 2 feet square. #AreaMotionActivation, #EntryWay https://www.entryalertproducts.com/product/motion-sensor-transmitter-for-rodann-driveway-entry-alert-tx-2000a/

Portable Receiver / Pager, Dakota PR-2500

Size 2.5” x 1.25” x .75“
Weight 2.1 oz without battery
Frequency 433.92 MHz
Code Combinations 256
Zones 4
Alert Methods Silent, vibrate, and audible
Memory up to 999 events per channel
Lithium Ion rechargeable battery
Battery charger included

Pager Product Instructions https://www.entryalertproducts.com/product/dakota-alert-pager-pr-2500/

Twin Photobeam Detector, In / Outdoor, Seco-Larm

This device requires separate sounder, alert or chime system (and power supply for sensor and possibly chime). See items 1-9 on our accessories page.

ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.

Product Info sheet
Installation Manual
Manufacturers Web site
Note: Requires separate sounding device and power supply.

NOTE: This device is not a stand alone system or plug"n play installation. Minor low voltage wiring required and additional items required to use.

Features

• Built-in laser beam alignment system speeds accurate, reliable positioning.


• Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.


• Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.


• Weatherproof, sunlight-filtering case for indoor & outdoor use.


• Anti-frost system so that beam functions even in extreme conditions.


• Automatic input power filtering with special noise rejection circuitry.


• N.C./N.O. alarm output.


• N.C. tamper circuit included.


• Non-polarized power inputs.


• Quick, easy installation with built-in laser beam alignment system.


• Interruption time adjustable for nearly all situations.

#AlarmSystem, #OutdoorMotionSensor https://www.entryalertproducts.com/product/twin-photobeam-detector-outdoor-seco-larm/

Twin Photobeam Detector, In / Outdoor, Seco-Larm

This device requires separate sounder, alert or chime system (and power supply for sensor and possibly chime). See items 1-9 on our accessories page.

ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.

Product Info sheet
Installation Manual
Manufacturers Web site
Note: Requires separate sounding device and power supply.

NOTE: This device is not a stand alone system or plug"n play installation. Minor low voltage wiring required and additional items required to use.

Features

• Built-in laser beam alignment system speeds accurate, reliable positioning.


• Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.


• Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.


• Weatherproof, sunlight-filtering case for indoor & outdoor use.


• Anti-frost system so that beam functions even in extreme conditions.


• Automatic input power filtering with special noise rejection circuitry.


• N.C./N.O. alarm output.


• N.C. tamper circuit included.


• Non-polarized power inputs.


• Quick, easy installation with built-in laser beam alignment system.


• Interruption time adjustable for nearly all situations.

#AlarmSystem, #OutdoorMotionSensor https://www.entryalertproducts.com/product/twin-photobeam-detector-outdoor-seco-larm/

Optex Wireless Entry Door Contact with Remote Alert Chime, RC20TC10

The Optex wireless remote alert chime can be located up to 500" away line of sight (150" maximum through interior walls or 70" maximum through concrete/steel walls/floors) from the included door opening sensor. Up to 3 door opening sensors (TC-10) can be distinguished with the wireless receiver. Each sensor can activate a unique tone/chime. If only one door sensor is used, user can select 1 of 3 tones / chimes. Alert tone / chime only goes off as follows until door is closed and entry alert system resets itself: (channel 1: single door bell, channel 2: single decreasing warble alert tone, channel 3: five repeated electronic sounds). Volume on the receiver is adjustable. Sensor may activate channel 4 which is a NO / NC (Form "C") relay which can be activated for 1, 5, 30 or 60 seconds or continuous until reset.

Product Demonstration Video:



 

Product Instructions

Features

• Identifies 4 zones / channels by 3 different tones and LED lights


• Able to learn 12 sensor codes (each of 4 zones can learn up to 3 transmitters)


• Over 8 million transmission codes possible, eliminates interference from neighbors


• Latches into alarm with "Continuous mode" function


• Adjustable duration for terminal output.


• Adjustable volume


• Low battery indicator


• Receiver powered by 9VDC adapter (included)


• Sensor can be installed on door/window


• Sensor can be installed indoors or outside (out of direct rain).

#DoorAlarm, #EntryAlerts https://www.entryalertproducts.com/product/optex-wireless-entry-door-contact-remote-alert-chime-rc20tc10/

Siren, 15 watts, 12VDC, 110db

15 Watt 12VDC Siren is weatherproof with a 110db sound level. Simply connects to the relay output of an Alert Receiver. Requires 1 Amp adapter (60-301). Cone 3.5" diameter x 4" long. #AlarmSystems, #Siren https://www.entryalertproducts.com/product/siren-15-watts-12vdc-110db/