Entry Alert Invisible Beam System With Chime, Seco-Larm

Safety sensor for garage doors
Overhead doors security sensor
Entry detection for store front

• Safety sensor for garage doors


• Overhead doors security sensor


• Entry detection for store front


• Other applications: offices, schools, warehouse, vehicle detection, etc.


• Retro-reflective design.


• Range: Up to 22 feet (7m)


• Perfect for monitoring an entrance or use as an entrance indicator.


• Will make "ding-dong" sound or siren sound when the beam is interrupted.


• Speaker volume can be adjusted or turned off.


• When in siren mode, sounding time is adjustable from 3 to 30 seconds.


• 9VDC adapter included.


• Cable (w/plugs) wire length is 33 feet (distance between sensor & speaker).


• All components plug into each other. No hard wiring required.

Includes the following:
- NIR retro-reflective sensor.
- Reflector.
- Speaker.
- 9VDC 200mA output adapter.

WIRELESS version of above unit now available: item 80-550

Product Info Sheet

Instructions #DoorAlarm, #EntryAlerts, #EntryMotionSensorDetection https://www.entryalertproducts.com/product/entry-alert-system-with-chime-seco-larm/

Electronic Chime, 12VDC SU-CHIME

A 12VDC very pleasant sounding chime. Simply connects to the relay output (will require adapter 60-301) or 12VDC output of our entry alarms to create a traditional door bell "ding-dong" sound. #AlarmSystems, #WirelessTransmitter https://www.entryalertproducts.com/product/electronic-chime-12vdc/

Siren, 15 watts, 12VDC, 110db

15 Watt 12VDC Siren is weatherproof with a 110db sound level. Simply connects to the relay output of an Alert Receiver. Requires 1 Amp adapter (60-301). Cone 3.5" diameter x 4" long. #AlarmSystems, #Siren https://www.entryalertproducts.com/product/siren-15-watts-12vdc-110db/

Electronic Sounder, Extra Loud Siren or Steady Tone Option

This extra loud sounder puts out 90dB at 12VDC drawing only 400mA. Yelp (Siren) or Steady output can be chosen. This item is a great addition to items 00-200, 60-509, 60-609, 60-620, 20-303, 25-302, 25-303, 60-700, 60-740, 25-402, 25-403 when used in industrial manufacturing areas with a lot of background noise. 12VDC, 400mA, 90dB Negative 12vdc input goes to either one of the Black wires. Positive 12vdc input goes to either one of the Yellow wires for Steady Tone or either one of the Red wires for siren. #AlarmSystems, #ElectronicSounder https://www.entryalertproducts.com/product/electronic-sounder-siren-or-steady-tone-option/

Entry Alert Invisible Beam System With Chime, Seco-Larm

Safety sensor for garage doors
Overhead doors security sensor
Entry detection for store front

• Safety sensor for garage doors


• Overhead doors security sensor


• Entry detection for store front


• Other applications: offices, schools, warehouse, vehicle detection, etc.


• Retro-reflective design.


• Range: Up to 22 feet (7m)


• Perfect for monitoring an entrance or use as an entrance indicator.


• Will make "ding-dong" sound or siren sound when the beam is interrupted.


• Speaker volume can be adjusted or turned off.


• When in siren mode, sounding time is adjustable from 3 to 30 seconds.


• 9VDC adapter included.


• Cable (w/plugs) wire length is 33 feet (distance between sensor & speaker).


• All components plug into each other. No hard wiring required.

Includes the following:
- NIR retro-reflective sensor.
- Reflector.
- Speaker.
- 9VDC 200mA output adapter.

WIRELESS version of above unit now available: item 80-550

Product Info Sheet

Instructions #DoorAlarm, #EntryAlerts, #EntryMotionSensorDetection https://www.entryalertproducts.com/product/entry-alert-system-with-chime-seco-larm/

Door / Window Sensor, Wireless Long Range, WD-434TL

Magnetic type contact sensor. Notifies you when your door or window is open. Supervised Sensor: monitors the sensors and their battery condition automatically. Lithium battery included. Operating range: 800 feet. Easy to set up. FCC/IC approved. One year warranty.

#DoorAlarm, #WindowSensor https://www.entryalertproducts.com/product/door-window-sensor-long-range-wd-434tl/

Door Entrance Alert - Mace - Cabinet Door Alarm, M80201

The Entrance Alert is a versatile device that sounds a 95 dB alarm when anyone opens a door or window. It installs easily onto a door or window and provides an alert alarm for 45 seconds and then resets itself. On/Off switch allows for use only when necessary. Ideal for doors, windows, and even cabinets. Battery included. #CabinetDoorAlarm, #EntranceAlert https://www.entryalertproducts.com/product/door-entrance-alert-mace-cabinet-door-alarm-m80201/

Battery Powered Motion Entrance Alert, Rodann SL-40

The SL-40 passive infrared door announcer is a self-contained, battery operated, motion detector. From the detector comes a pleasant sounding chime every time a person enters its detection area. This stand alone unit was designed to detect infrared energy emitted by the human body when in motion, and its performance is unaffected by sunlight, car headlights, reflections, shadows, or colors. It will also operate with a door open or closed. Designed with state of the art electronic components to operate under the most demanding circumstances the SL-40 is ideal for monitoring small office and shop entrances.

Product Demonstration Video:



 

• Powered by 9 volt battery


• Long battery life circuit design


• Fully automatic, no alignment required


• Ceiling, above door, or side mounting


• No wires, easy installation


• Welcomes with a pleasant sounding chime


• Prevents unannounced entry


• Helps control theft


• One year warranty


• Low cost

Product Instructions #MotionEntry, #MotionEntryAlarmSystem https://www.entryalertproducts.com/product/battery-powered-entrance-alert-rodann-sl-40/

Voice Alert System 6 - Wireless Motion Sensor Monitor Alert

Voice Alert System-6 is a new annunciator system featuring wireless PIR sensors transmitters and a remote receiver/speaker base unit. Users record their own alert messages and are then notified with their own voice message when activity in a monitored is detected. Key applications include: Wireless Driveway Alarm Residential and Small Business Security Child Monitoring and Pool Safety Home Automation System-6 allows a maximum of six user recorded messages. Each message is specific to one zone. For instance, zone one could be for a driveway alarm -“Car coming up the driveway” while zone two could be for a sensor monitoring the back yard- “Alert! Child by the pool!” Perhaps a third sensor guards a side entrance against intruders. However, when this PIR detects movement, the base unit plays “Intruder on patio” and triggers a floodlight using one of four relays included on the base unit. System-6 can monitor all three zones simultaneously and still have three additional zones available when needed. Users can alter their messages and place the wireless sensors wherever they wish. Voice Alert System-6 sets up in minutes and can be completely customized to fit their individual needs. The wireless PIRs feature: all weather protection, adjustable mounting and sensitivity, and can send a signal 300 feet through walls and up to 1000 feet in open space. Includes the base unit and one wireless sensor. You may add additional sensors (Item# 30-212) to cover up to 6 areas total.   Frequently Asked Questions for Voice Alert System   Link to manufacturers website for more information

Features 6-Zone Monitoring Capability Customized Voice-Recordable Alerts All Weather, Wireless PIR Sensor Transmitters Multiple Beam Patterns for Optimal Detection Adjustable Mounting, Beam Sensitivity, and Delay Timer 4 form "C" Relays to Trigger Additional Devices

#MotionSensor, #VoiceAlert https://www.entryalertproducts.com/product/voice-alert-system-6-wireless-motion-sensor-monitor-alert/

Battery Powered Motion Entrance Alert, Rodann SL-40

The SL-40 passive infrared door announcer is a self-contained, battery operated, motion detector. From the detector comes a pleasant sounding chime every time a person enters its detection area. This stand alone unit was designed to detect infrared energy emitted by the human body when in motion, and its performance is unaffected by sunlight, car headlights, reflections, shadows, or colors. It will also operate with a door open or closed. Designed with state of the art electronic components to operate under the most demanding circumstances the SL-40 is ideal for monitoring small office and shop entrances.

Product Demonstration Video:



 

• Powered by 9 volt battery


• Long battery life circuit design


• Fully automatic, no alignment required


• Ceiling, above door, or side mounting


• No wires, easy installation


• Welcomes with a pleasant sounding chime


• Prevents unannounced entry


• Helps control theft


• One year warranty


• Low cost

Product Instructions #MotionEntry, #MotionEntryAlarmSystem https://www.entryalertproducts.com/product/battery-powered-entrance-alert-rodann-sl-40/

Optex Wireless 1000 Door Contact / Wireless Transmitter, TC-10U

The Optex Wireless 1000 (TC-10U) Door Contact / Wireless Transmitter is designed for indoor and outdoor use (not in direct rain). It can be installed on doors and windows. This Contact / Transmitter features a low battery signal and is powered by a CR123 - 3V lithium battery.

The TC-10U is a battery-powered door / window contact and wireless transmitter for the RCTD-20U (Wireless 2000). When used as a wireless transmitter and installed in the backbox of any of OPTEX"s battery operated detectors, extended detection range and wireless notification to your RC-20U chime box is achieved. Instantly monitor larger areas with minimal false alarms for a greater sense of protection. When used as a door contact, the TC-10U will send a signal to the RC-20U receiver chime box. This gives the user a notification when the door is opened, and is perfect for high traffic areas around entrances where an above door sensor is not practical.

Features

• Can be installed on Door/Window


• Weather proof structure (not rain proof)


• Over 8 million wireless codes possible (eliminates interference)


• Low battery signal

#AlarmSystems, #WirelessTransmitter https://www.entryalertproducts.com/product/optex-wireless-1000-door-contact-wireless-transmitter-tc-10u/

Receiver for the Rodann Entrance Alert Set, RX-1000A

Extra Receiver for the Rodann® Entrance Alert Set, RX-1000A.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206. #AlarmSystem, #EntryAlerts https://www.entryalertproducts.com/product/receiver-for-the-rodann-entrance-alert-set-rx-1000a/

MACE Motion Alert Motion Detector With Security Alarm, M80200

Motion activated alarm and door chime. Dual-purpose passive infrared alarm detects movement in any selected area. Two modes of operation allows it to function as a door chime and also a 110 dB alarm. The door chime is useful for alerting you of someone’s presence. The alarm’s programmable keypad offers added security since you will have control over the access code. Adjustable sensor head rotates so you can selectively choose the area covered. A low battery indicator tells you when the battery needs to be replaced. Comes with complete mounting kit and instructions. 9 volt battery (sold separately). #AlarmSystem, #MotionDetector https://www.entryalertproducts.com/product/mace-motion-alert-motion-detector-with-security-alarm-m80200/

Long Range Wireless Point to Point Entry Alert

Wireless remote (up to 1500 feet; line of sight transmission distance) entry way alert or alarm is activated when person or object passes through the invisible line between the twin photobeam sensor (transmitter) and receiver. Twin photobeam requires power at each end of invisible beam (power adapters included). Separation of photo beam units can be from 3 feet up to 90 feet (or greater with optional Photobeams – contact us). Photobeam Sensor Receiver must be wired to 3vdc CR2 battery powered wall-mountable long range transmitter and included 12vdc adapters.

For more information visit our entry alerts page. #Atlanta, #SecuritySystems #ALERTTYPE https://www.entryalertproducts.com/long-range-wireless-point-point-entry-alert/

Electronic Chime, 12VDC SU-CHIME

A 12VDC very pleasant sounding chime. Simply connects to the relay output (will require adapter 60-301) or 12VDC output of our entry alarms to create a traditional door bell "ding-dong" sound. #AlarmSystems, #WirelessTransmitter https://www.entryalertproducts.com/product/electronic-chime-12vdc/

Wireless PIR Indoor Motion Sensor, Dakota IR-2500

The IR-2500 is the newest wireless PIR indoor motion alarm from Dakota Alert. With a wireless range of up to 2000 feet* and full compatibility with any of our 2500 Series transmitters or receivers, the IR-2500 will allow you to monitor many indoor locations that were difficult before. The passive infra red detector is able to monitor an area up to 100º wide. With the integral mask, the detection area can be narrowed down to 20º or anywhere in between. With the swivel mount, the IR-2500 sensor can be adjusted right to left up to 80º and up and down up to 50º. With three different sensitivity settings, the IR-2500 can detect a person up to 12 feet, 25 feet or 40 feet away. The sensor can also be set to flash an LED or stay dark when a signal is sent. The IR-2500 is powered by one 9 volt battery and will have a battery life of about 12 months under normal conditions. There is also a low battery alert to notify you when it is time to replace the battery. The IR-2500 is designed for indoor or light duty outdoor applications under an eave or awning or other protected location. Operating range -30º F to 120º F.

Motion Sensor Product Instructions #AlarmSystems, #MotionSensor https://www.entryalertproducts.com/product/indoor-motion-sensor-ir2500/

Motion Sensor/Transmitter for Rodann Driveway Entry Alert, TX-2000A

The outdoor weatherproof transmitter unit that can be either side or overhead mounted. A 9V replaceable battery is included and is already installed for your convenience. In the back of the unit there are six dip-switches. Numbers 1-4 control the communication security codes that must match the receiver. Numbers 5 & 6 on the transmitter identifies which of up to 4 transmitters (zones) is sending a driveway motion alert. There is an antenna that can rotate for optimal transmission to the receiver up to 1000" (LOS) or 600" recommended. The driveway beam projection at 25 feet is 1 foot square and at 50 feet it is 2 feet square. #AreaMotionActivation, #EntryWay https://www.entryalertproducts.com/product/motion-sensor-transmitter-for-rodann-driveway-entry-alert-tx-2000a/

Entrance Alert Set, Rodann, TX/RX-1000A

The "RX-1000A & TX-1000A Wireless Door Chime Set" is a highly versatile passive infrared (PIR) door announcer that senses the infrared emitted by a person or object crossing through its field of view. The RX-1000A & TX-1000A wireless door chime operates without reflectors or light beam projectors and therefore is immune to false alerts caused by transient light. You can use with door opened or closed. The RX-1000A & TX-1000A Wireless Door Chime is battery powered and does not require electrical wiring. This unique PIR makes the RX-1000A & TX-1000A wireless door chime set the best solution for virtually any installation. It can also be used on warehouse roll up doors, inside display cabinets, restricted area protection, or (patio, bedroom, bathroom) window alerting device.

Additional Receivers RX-1000A and/or Sensor / Transmitters TX-1000A may be added! Receiver RX-1000A (item 25-303) and Transmitter (item 25-304)
An additional wired speaker can be also added to the wireless receiver; it"s item number is 25-405

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

Product Demonstration Video:

 

• Detects any Motion


• Infrared Sensor


• Wireless - Simple Installation


• Receiver has a volume control and plugs into a wall outlet anywhere up to 500" of the transmitter.


• Receiver uses 110 Volts


• Transmitter is battery powered


• 100% tested at the factory


• No Reflectors


• No Light Beams


• No False Alerts from transient light


• Up to 500 Foot wireless alert signal transmission Range


• Remote Receiver with Volume Control operates on 110V AC


• Alerts you with a pleasant electronic chime tone-four sound options


• Not affected by wind, heat, humidity or shadows


• Counters available

  #EntryWayAlert https://www.entryalertproducts.com/product/entrance-alert-set-rodann-tx-rx-1000a/

Recordable Entry Alert / Motion Alarm

MOTION ALARM AND MOTION DETECTION ALARM SYSTEM

Protect your home, valuables and most importantly - your family with the amazing Sound Sentry XL motion alarm. It"s a portable recordable motion alarm that you can place anywhere, your home, your office, your car - anywhere! This inexpensive motion sensing alarm system has hundreds of uses. It"s also great for Halloween or Christmas greetings on your door!! With the included removable sticky pads and velcro strips you can stick it to any flat surface (such as a wall) or use the included stand to place it on the floor or a table. Press the record button to record any sound, from alarm sounds to dogs barking to a verbal warning - anything you can think of! The sound plays when anything moves within 11 feet of the sensor. Runs on regular "AAA" batteries

The Sound Sentry allows you to record any sound, from Barking Dogs to alarm sounds - even gun cocking sounds!. Doorbells, voice memos, practical jokes - just about anything you can think of. Below is the full instruction guide on how you can make the most of of your Sound Sentry XL!

Using the SOUND SENTRY XL
The Sound Sentry XL has an on/off switch located on the top of the unit. Ensure the unit has 3 AAA batteries installed and the on/off switch is set to "on".

1. To record a new sound hold down the REC button located on the front of the Sound Sentry and speak or use your computer to play your sound effect at least 7 inches away from the microphone in a room with little or no background noise.
2. To stop recording, release the REC button.
3. To test your sound effect move your hand in front of the sensor bubble near the bottom of the unit.

The Sound Sentry has a maximum detection range of about 10 feet so place your unit accordingly.

REPLACING THE BATTERIES*

The Sound Sentry XL uses 3 AAA type batteries. Replace the appropriate batteries when the sound volume begins to decrease or playback is distorted.

1. Remove the screws from the battery compartment cover with a Philip screwdriver.
2. Take out the old or weak batteries and replace with new batteries according to polarity symbols marked inside.
3. Replace the cover, then inset and tighten the screws.

Sound Sentry XL Tricks and Tips
You can turn your Sound Sentry XL into anything from a Barking Dog Alarm to a buzzer alarm (use our free sound library here on the site!), leave messages for your family - it can even be a doorbell - just use a doorbell sound and stick it near your door with the included sticker.
Here are some helpful tricks and tips for recording sounds with your Sound Sentry XL!

1. Make certain when you press the record button your finger/thumb is not covering the microphone area.
2. For cleanest recording use the entire 7 seconds.
3. To force a playback delay play your sound and then record silence until the 7 seconds is up, then release the record button. The Sound Sentry will play the sound and your recorded silence becomes a delay before the sound will play again.
4. Note motion that is very close to the sensor (less than 6 inches) is not easily detected as it obscures the entire sensor area. Effective range is 6 inches to about 11 feet away.
5. It is recommended you do not record into the Sound Sentry XL like a Walkie-Talkie. Best results occur when you record clearly from at least 6 inches away from the microphone. #EntryAlerts, #MotionSensor https://www.entryalertproducts.com/product/recordable-entry-alert-motion-alarm/

Long Range Wireless Point to Point Entry Alert - Twin Photobeam, up to 90 feet

Wireless remote (up to 1500 feet; line of sight transmission distance) entry way alert or alarm is activated when person or object passes through the invisible line between the twin photobeam sensor (transmitter) and receiver. Twin photobeam requires power at each end of invisible beam (power adapters included). Separation of photo beam units can be from 3 feet up to 90 feet (or greater with optional Photobeams - contact us). Photobeam Sensor Receiver must be wired to 3vdc CR2 battery powered wall-mountable long range transmitter and included 12vdc adapters (instructions included). Transmitter settings allow one of four tones/chimes to be sent wirelessly up to 1500 feet (line of sight) away to Audible alert receiver with on/off switch and volume control. Chime selection (Classical, Westminster, Ding Dong, Whistle) only sounds twice when something passes through invisible photo beam. Multiple entry ways can be monitored with additional sensors ( item 80-402 ) or similar, power supplies ( item 60-300 ) and transmitters ( item 60-105 ). The additional entry ways can be set to individual unique chime settings if desired. Multiple wireless wall/desk receivers ( item 60-609 ) may be used with single or multiple entry transmitters.

When the receiver gets a signal from the transmitter one of 4 different tones (Classical, Westminster Chime, Ding Dong, Whistle) will sound for a few seconds. There is also a volume control so you can set the sound to the desired level. The receiver is also equipped with 4 (one for each zone) NO/NC (24vdc @ 3amps) relays and one 12 VDC (400mA max.) output terminal that can activate when a signal is received. The receiver can be user programmed so the 12VDC terminal and relays will activate for 1 second, 10 seconds, 60 seconds or 10 minutes. The tones will sound for several seconds.

Transmitters/receivers can be set to one of 256 frequency settings to avoid interference with nearby retailers using same system.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

What"s Included:
- Qty 1: Wireless 4 zone, chime selectable, relay output Receiver
- Qty 1: Twin Photobeam Sensor - sender (transmitter) & receiver require power - up to 90 foot separation
- Qty 2: 12vdc 500ma transformer for Twin Photo beam
- Qty 1: Long range transmitter
- Qty 1: 5 feet+, 2 conductor wire for wireless transmitter

What may be required:
- additional wire; depending on your installation.
- wire connectors - screw-on, butt, crimp, telephone/date/splice, or solder, insulating tape, etc.

Wireless Receiver Instructions

Long Range Transmitter Instructions

Twin Photobeam Detector, 90 feet max.

Addendum to Instructions

NOTE: This system is NOT plug"n play installation. Low voltage wiring required (click here for instructions included), product set-up, interconnect and mounting required*.

* Wire cutting, wire connecting, additional wire, wire connectors, screw drivers (all available at Home Depot, Lowes, Radio Shack, etc.) may all be required depending on your specific installation. This is all low-voltage wiring; however some people may require the services of an electrician, or someone with data/video/audio/telephone/tv wiring experience for proper installation.
Here are the specific instructions on how to interconnect all the items; we will only take returns on this system package (or pieces of it) if they are returned in brand new condition or a specific item is defective and needs replacing. #EntryAlerts, #WirelessTransmitter https://www.entryalertproducts.com/product/long-range-wireless-point-to-point-entry-alert-twin-photobeam-90-feet/

Long Range Wireless Remote Entry Way Alert - 35 foot Reflective Beam

Wireless remote chime (up to 1500 feet; line of sight transmission distance) entry way alert is activated when person or object passes through the Reflective IR invisible beam. Beam sensor is powered by 12vdc adapter (included) on one side and by (non-powered) beam reflector on other side of entry way. Separation of sensor and reflector can be from 3 feet up to 35 feet (or greater with optional Reflectors). Reflective Beam Entry Way Sensor includes 5 feet of cable and must be wired to 3vdc CR2 battery powered wall-mountable transmitter and included 12vdc adapter (instructions included). Transmitter settings allow one of four tones/chimes to be sent wirelessly up to 1500 feet (line of sight) away to Audible alert receiver with on/off switch and volume control. Chime selection (Classical, Westminster, Ding Dong, Whistle) only sounds twice when something passes through invisible IR beam. Multiple entry ways can be monitored with additional sensors ( item 80-403 ), power supplies ( item 60-300 ) and transmitters ( item 60-105 ). The additional entry ways can be set to individual unique chime settings if desired. Multiple wireless wall/desk receivers ( item 60-609 ) may be used with single or multiple entry transmitters.

When the receiver gets a signal from the transmitter one of 4 different tones (Classical, Westminster Chime, Ding Dong, Whistle) will sound for a few seconds. There is also a volume control so you can set the sound to the desired level. The receiver is also equipped with 4 (one for each zone) NO/NC (24vdc @ 3amps) relays and one 12 VDC (400mA max.) output terminal that can activate when a signal is received. The receiver can be user programmed so the 12VDC terminal and relays will activate for 1 second, 10 seconds, 60 seconds or 10 minutes. The tones will sound for several seconds.

Transmitters/receivers can be set to one of 256 frequency settings to avoid interference with nearby retailers using same system.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

What"s Included:
- Qty 1: Wireless 4 zone, chime selectable, relay output Receiver
- Qty 1: Reflective point to point invisible beam
- Qty 1: 12vdc 500ma transformer for beam
- Qty 1: Long range transmitter

What may be required:
- additional wire; depending on your installation.
- wire connectors - screw-on, butt, crimp, telephone/date/splice, or solder, insulating tape, etc.

Wireless Receiver Instructions

Long Range Transmitter Instructions

Reflective IR Beam Sensor Instructions (supplied 35 feet)
Reflective IR Beam Sensor Instructions (optional 45 feet)

Addendum to Instructions

NOTE: This system is NOT plug"n play installation. Low voltage wiring required (click here for instructions included), product set-up, interconnect and mounting required*.

 * Wire cutting, wire connecting, additional wire, wire connectors, screw drivers (all available at Home Depot, Lowes, Radio Shack, etc.) may all be required depending on your specific installation. This is all low-voltage wiring; however some people may require the services of an electrician, or someone with data/video/audio/telephone/tv wiring experience for proper installation.
Here are the specific instructions on how to interconnect all the items; we will only take returns on this system package (or pieces of it) if they are returned in brand new condition or a specific item is defective and needs replacing. #AlarmSystems, #EntryAlerts https://www.entryalertproducts.com/product/long-range-wireless-remote-entry-way-alert-reflective-beam/

Siren Mini Piezo, 12VDC

Mini Piezo 12 VDC Siren has similar sound to a domestic smoke alarm. Piercing 105 dbA mini siren simply connects to the, 12 Volt output of any Receiver or can be used on the relay output of an Alert receiver (requires 500 ma adapter item 60-301 if used on the relay output). #AlarmSystems, #Siren https://www.entryalertproducts.com/product/siren-mini-piezo-12vdc/

Motion Sensor/Transmitter for Rodann Driveway Entry Alert, TX-2000A

The outdoor weatherproof transmitter unit that can be either side or overhead mounted. A 9V replaceable battery is included and is already installed for your convenience. In the back of the unit there are six dip-switches. Numbers 1-4 control the communication security codes that must match the receiver. Numbers 5 & 6 on the transmitter identifies which of up to 4 transmitters (zones) is sending a driveway motion alert. There is an antenna that can rotate for optimal transmission to the receiver up to 1000" (LOS) or 600" recommended. The driveway beam projection at 25 feet is 1 foot square and at 50 feet it is 2 feet square. #AreaMotionActivation, #EntryWay https://www.entryalertproducts.com/product/motion-sensor-transmitter-for-rodann-driveway-entry-alert-tx-2000a/

Voice Alert Wireless Door Entry Announcer, VA6DEA

Voice Alert System-6 allows voice-recorded messages to identify activity for up to six monitored zones. The Voice Alert System-6 uses wireless sensors (contact closure / motion / etc.) that send a wireless signal up to 1000" line of sight (or up to 300" inside) to an indoor receiver/speaker (Base Unit).

When a wireless sensor is activated a radio signal is sent from the wireless transmitter to the remote Base Unit. A custom message, which you"ve recorded in your own voice for that specific zone, is played on the Base Unit. One of four form "C" relays (NO/NC dry on/off switches) attached to the Base Unit can optionally be triggered (see example below). With its ability to secure up to six separate zones, each with its own customized recorded message in your own voice, Voice Alert is the most flexible system available.

Users can place the wireless transmitter sensors wherever needed and alter their recorded messages at any time. Voice Alert System-6 sets up in minutes and can be completely customized to handle tough wiring situations. Multiple base units may also be used to trigger alerts in two or more areas simultaneously.

The TXPCBB transmitter sends a radio signal by input from either Normally Open (NO) or Normally Closed (NC) devices. An included magnetic door contact sensor with 2" of wire is included. The small magnet mounts on the door and the small wired sensor mounts opposite the magnet on the door frame and it connects (via the included 2" of wire) to the NC (normally closed) terminals on the transmitter.

The transmitter box is housed in a water-tight NEMA box, the TXPCBB has a radio transmission range of up to 1000" line of sight or up to 300" through walls. The NEMA box will handle all environments and includes mounting tabs to accommodate a variety of mounting options.

The TXPCBB transmitter is powered by a 9V battery. An alkaline battery has a battery life of over one year and a lithium 9V battery will last three to five years. The system includes a "low battery" feature designed to notify the user when a battery voltage approaches a low battery threshold.

Manufacturer"s Website

Receiver Instructions

Wireless Transmitter Instructions #AlarmSystem, #MotionEntry, #VoiceAlert https://www.entryalertproducts.com/product/voice-alert-wireless-door-entry-announcer-va6dea/

Dakota Indoor Motion Sensor / Receiver 2500, IRDCR-2500

The IRDCR-2500 is the newest addition to the family of motion sensors from Dakota Alert. This indoor PIR motion detector is compatible with all transmitters and receiver in the Dakota 2500 Series, and also has a range of up to 2000" depending on local terrain. Monitoring indoor locations has never been easier!

The passive infrared detector is able to monitor an area up to 100 degrees wide. This can be narrowed down to 20 degrees , or any degree in between, with the integral mask. The swivel mount makes it simple to adjust the sensing range from right to left, up to 80 degrees, and up and down up to 50 degrees. There are also three different sensitivity settings, allowing detection of a person up to 12, 25 or 40 feet away. Another option available: Have the sensor flash an LED or stay dark when a signal is sent. The IR-2500 is powered by one 9 volt battery and will have a battery life of about 12 months under normal conditions. There is also a low battery alert to notify you when it is time to replace the battery.

The IR-2500 is designed for indoor or light duty outdoor applications under an eave or awning or other protected location. Operating range temperature -30 F to 120 F. Great for home security, retail and business!

Alert Receiver Product Instructions

Motion Sensor Product Instructions #DakotaAlert, #MotionSensor https://www.entryalertproducts.com/product/dakota-indoor-motion-sensor-receiver-2500-irdcr-2500/

Enforcer Single Photobeam Sensor, 50 Ft, Seco-Larm

This device requires separate sounder, alert or chime system (and power supply for sensor and possibly chime). See items 1-9 on our accessories page.

The Seco-Larm Enforcer Single Photo beam Motion Sensor is the easy-to-install way to protect large indoor and outdoor openings as well as allow easy exit from areas protected by access control equipment. When used as part of an alarm system, it can detect vehicles along a driveway or entering a factory or similar site.

Typical Applications
- Gates or garage doors
- Overhead doors
- Parking lots
- Driveways
- Warehouses

Product Info sheet
Installation Manual
Manufacturers Web site

Note: Requires separate sounding device and power supply.
NOTE: This device is not a stand alone system or plug"n play installation. Minor low voltage wiring required and additional items required to use. #AlarmSystems, #PhotoBeamSensor https://www.entryalertproducts.com/product/enforcer-single-photobeam-sensor-50-ft-seco-larm/

Rodann Driveway / Entry Alert Receiver, RX-2000A

The indoor driveway / entry alert receiver has a plug-in 12VDC power supply with a 6 foot cord. The receiver may be placed on a counter top, table or hung on the wall. The electronic LED counter feature allows you to either count customers or count unexpected visitors / vehicles moving in your driveway. There is a reset button next to the counter, when pressed it will zero out the counter. This unit also has six dip-switches on the back of this unit. Numbers 1-4 must match transmitter. Number 5 controls the output of the 12VDC terminals on the back of the receiver with a one second or five second 12VDC output, Number 6 is not used. The terminal screws on the receiver back give you the option of adding a bell, buzzer, horn, siren, strobe or anything that is 12VDC operated. The other speaker terminal (SPKR) screws allow you to add an auxiliary speaker via a wire connection to get the same “Ding Dong” sound as the receiver. A volume control knob adjusts volume on receiver and auxiliary speaker and a different tone is generated depending on which transmitter (zone) is activated. For optimal reception the antenna will swivel 360°.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206. #AlarmSystems, #DrivewayAlert https://www.entryalertproducts.com/product/receiver-for-the-rodann-driveway-entry-alert-rx-2000a/

Optex Wireless Entry Door Contact with Remote Alert Chime, RC20TC10

The Optex wireless remote alert chime can be located up to 500" away line of sight (150" maximum through interior walls or 70" maximum through concrete/steel walls/floors) from the included door opening sensor. Up to 3 door opening sensors (TC-10) can be distinguished with the wireless receiver. Each sensor can activate a unique tone/chime. If only one door sensor is used, user can select 1 of 3 tones / chimes. Alert tone / chime only goes off as follows until door is closed and entry alert system resets itself: (channel 1: single door bell, channel 2: single decreasing warble alert tone, channel 3: five repeated electronic sounds). Volume on the receiver is adjustable. Sensor may activate channel 4 which is a NO / NC (Form "C") relay which can be activated for 1, 5, 30 or 60 seconds or continuous until reset.

Product Demonstration Video:



 

Product Instructions

Features

• Identifies 4 zones / channels by 3 different tones and LED lights


• Able to learn 12 sensor codes (each of 4 zones can learn up to 3 transmitters)


• Over 8 million transmission codes possible, eliminates interference from neighbors


• Latches into alarm with "Continuous mode" function


• Adjustable duration for terminal output.


• Adjustable volume


• Low battery indicator


• Receiver powered by 9VDC adapter (included)


• Sensor can be installed on door/window


• Sensor can be installed indoors or outside (out of direct rain).

#DoorAlarm, #EntryAlerts https://www.entryalertproducts.com/product/optex-wireless-entry-door-contact-remote-alert-chime-rc20tc10/

Voice Alert 6 Extra Receiver Speaker, VA6000R

The Receiver/Speaker unit consists of a receiver, voice recording/playback system and speaker. Controls allow for power input, recording of up to six voice messages (in your voice), and programming of each Sensor/Transmitter to activate your voice message. Any number of Sensor/Transmitters can use the same code to activate the same message. Your Receiver/Speaker also includes, 4 connections to activate other devices.

General Specifications:

• Records six separate voice messages (6 seconds each)

• Supports an unlimited number of Sensor Transmitters

• Speaker volume control

• Audio Line Output Connection

• Voice message (user initiated): One button for each zone

• Voice message (transmitter initiated): Programmed to desired message (user programmable)

• Individual “C” relays enable other devices to be triggered

• Missed message indicator: Flashing LED

• Missed message playback: Push button

• Receiver type: Super Heterodyne

• Frequency of receiver: 433.92 MHz

• Method of recording: Digital, solid state, user-recordable

• FCC Part 15 Approved

• Receiver Stability: Crystal

• Receiver Sensitivity: 100dBm

• Low Battery LED indicates sensor w/low battery

• Low Battery voice message identifies specific zone

• AC/DC Power Adapter - 6’ cord length

• Power Requirement: 117V AC - 60Hz

• Power Input: 9VDC - 1 AMP

• Installation: Wall or tabletop

• Receiver/Speaker Dimensions: 8.50” W x 1.75” H x 5.75” D

#AccessoriesEntryAlerts, #ElectronicSounder, #MotionEntryAlarmSystem, #VoiceAlert https://www.entryalertproducts.com/product/voice-alert-6-extra-receiver-va6000r/

Emergency Alert Strobe / Flashing Light, 12VDC (6~24VDC)

• For "informative" general signaling requirements


• Incorrect polarity cannot damage circuit or draw current


• Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue to function


• Low current consumption with long operating lifespan of over 300 continuous hours (2,000,000 flashes)


• Includes choice of amber, blue, clear, or red lens


• Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic


• The SECO-LARM strobe light comes with a protective inner cover. This protects the high-voltage xenon tube when the colored lens has been removed


• Use in temperature ranging from -22ºF (-30ºC) to 140ºF (60ºC)


• SL-126-A24Q -- For 6- to 24-Volt use

#AlarmSystems, #EmergencyAlert https://www.entryalertproducts.com/product/emergency-alert-strobe-flashing-light-12vdc/

Voice Alert System 6 - Wireless Motion Sensor Monitor Alert

Voice Alert System-6 is a new annunciator system featuring wireless PIR sensors transmitters and a remote receiver/speaker base unit. Users record their own alert messages and are then notified with their own voice message when activity in a monitored is detected. Key applications include: Wireless Driveway Alarm Residential and Small Business Security Child Monitoring and Pool Safety Home Automation System-6 allows a maximum of six user recorded messages. Each message is specific to one zone. For instance, zone one could be for a driveway alarm -“Car coming up the driveway” while zone two could be for a sensor monitoring the back yard- “Alert! Child by the pool!” Perhaps a third sensor guards a side entrance against intruders. However, when this PIR detects movement, the base unit plays “Intruder on patio” and triggers a floodlight using one of four relays included on the base unit. System-6 can monitor all three zones simultaneously and still have three additional zones available when needed. Users can alter their messages and place the wireless sensors wherever they wish. Voice Alert System-6 sets up in minutes and can be completely customized to fit their individual needs. The wireless PIRs feature: all weather protection, adjustable mounting and sensitivity, and can send a signal 300 feet through walls and up to 1000 feet in open space. Includes the base unit and one wireless sensor. You may add additional sensors (Item# 30-212) to cover up to 6 areas total.   Frequently Asked Questions for Voice Alert System   Link to manufacturers website for more information

Features 6-Zone Monitoring Capability Customized Voice-Recordable Alerts All Weather, Wireless PIR Sensor Transmitters Multiple Beam Patterns for Optimal Detection Adjustable Mounting, Beam Sensitivity, and Delay Timer 4 form "C" Relays to Trigger Additional Devices

#MotionSensor, #VoiceAlert https://www.entryalertproducts.com/product/voice-alert-system-6-wireless-motion-sensor-monitor-alert/

Enforcer Single Photobeam Sensor, 50 Ft, Seco-Larm

This device requires separate sounder, alert or chime system (and power supply for sensor and possibly chime). See items 1-9 on our accessories page.

The Seco-Larm Enforcer Single Photo beam Motion Sensor is the easy-to-install way to protect large indoor and outdoor openings as well as allow easy exit from areas protected by access control equipment. When used as part of an alarm system, it can detect vehicles along a driveway or entering a factory or similar site.

Typical Applications
- Gates or garage doors
- Overhead doors
- Parking lots
- Driveways
- Warehouses

Product Info sheet
Installation Manual
Manufacturers Web site

Note: Requires separate sounding device and power supply.
NOTE: This device is not a stand alone system or plug"n play installation. Minor low voltage wiring required and additional items required to use. #AlarmSystems, #PhotoBeamSensor https://www.entryalertproducts.com/product/enforcer-single-photobeam-sensor-50-ft-seco-larm/

Multi-Purpose Programmable Timer Relay Module

This timer is easy to setup and use with all of our entry alert and driveway alarm products. Use the timer and optional higher current (500ma or 1 Amp) 12VDC adapter power supply to have higher power drawing accessories (up to 8 amps) activate for a specified length of time immediately after the sensor detects something and the alert receiver outputs an audible or visual alert. Programmable Timer Relay can be used on the 12VDC output of receivers or the Timer Relay can also be used on the Form C relay (NO/NC) channel/zone outputs of receivers to activate an accessory by channel/zone (additional 12VDC adapter power supply required for this application). Or use the timer to add a delay to the accessories activation. Timer activation or delay can be set from 1 second up to 60 minutes. With the easy to understand dip switches and versatility this timer allows you create the exact notification alert delay and or timed output (on) response you want.   click for Data Sheet   click for Product Instructions

#ProgrammableTimer, #Relay https://www.entryalertproducts.com/product/programmable-timer-relay-module/

Voice Alert TXPCBB Specialty Sensor and Transmitter

Voice Alert"s TXPCBB sensor/transmitter adds a new layer of functionality to the Voice Alert System-6 Wireless Annunciator.

The new transmitters enable any type of "sensing device" with output closures to trigger user recorded messages on a Voice Alert base unit receiver/speaker. Now you can get wireless notification from devices such as smoke alarms, CO (carbon monoxide) sensors, window, gate or door contacts, push button devices, water level indicators, a vibration switch or pressure pads ... to name a few. You"ll be instantly notified when an event occurs at the sensing device.

False alarms are eliminated as the TXPCBBs are only triggered when activated by the sensing device. The new sensor/transmitters can be used in a mixed installation environment with our standard PIR (passive infrared) sensors.

The TXPCBB sends a radio signal by input from either Normally Open (NO) or Normally Closed (NC) devices. There is no longer a need to pull cable or trench to receive information from remote sensing devices.

Housed in a water-tight NEMA box, the TXPCBB has a radio transmission range of up to 1000" line of sight or up to 300" through walls. The NEMA box will handle all environments and includes mounting tabs to accommodate a variety of mounting options.

The TXPCBB is powered by a 9V battery. An alkaline battery has a battery life of over one year and a lithium 9V battery will last three to five years. The system includes a "low battery" feature designed to notify the user when a battery voltage approaches a low battery threshold.

Two models are available:

TXPCBB as described above. (This is the product shown on this page)

TXPCBB-V that is triggered by an internal vibration switch. When the TXPCBB-V is bumped or moved it will trigger a signal that will activate a user recorded message from a Voice Alert receiver/speaker. Attach the TXPCBB-V to doors, windows, gates, fences, computers, inventory items, building materials, vehicles and more to be notified if movement occurs. (Special Order)

Wireless Transmitter Instructions #Accessories, #AlarmSystem, #EntryAlerts, #MotionEntry, #VoiceAlert https://www.entryalertproducts.com/product/voice-alert-txpcbb-specialty-sensor/