Wednesday, January 31, 2018

Wireless Home Security System

Wireless Home Security System - An Answer To Home Security Concerns




People employ various ways and means of enhancing their home security and wireless home security systems are often touted as one of the best ways of implementing home security. Other ways are – use of watchdog, use of wired camera security systems, joining a neighborhood watch group, use of alarm systems, sophisticated locks and a plethora of other security systems and measures (some of which are quite weird). There is none denying the fact that all these traditional home security measures are quite effective. However, a wireless home security system seems to have an edge over these traditional home security measures.

The wireless security systems (e.g. Driveway Monitoring security system) have 6 main advantages over their wired counterparts:

1. Easy to install: The wireless home security system are so easy to install that you can install them all by yourself. There is no need for getting outside help for installation/ configuration of a wireless security system. This is an advantage because in such a case only you would know the location of your wireless security cameras and the security codes etc. On the other hand, most wired security systems are quite a hassle owing to their inherent ‘wire-ful’ nature. Managing these wires is quite a task in itself and in tackling those wires, you often tend to lose focus from the actual task i.e. proper and intelligent installation of a home security system. With wireless home security systems, you just need to concentrate on your home security plan without worrying about where you would run the wires from etc etc.

2. Install anywhere: Since wireless security systems forego the use of wires, you can install them anywhere you wish (as long as they are in the range of their controller). This really makes things very convenient. You can install the wireless home security cameras in the bushes, on the terrace or just about any point that you want to monitor. This is something that you would not be able to achieve with a wired security camera. Moreover, wireless home security also comes in camouflaged forms e.g. wireless home security cameras pre-fitted (or pre-hidden) in a lamp or a show piece etc.

3. Flexibility (in altering your home security plan): With a wireless security system, you can easily alter your home security plan whenever you want e.g. the location of outdoor wireless security cameras can be easily changed in a hassle-free manner. On the contrary, a wired home security system would have you thinking about the wiring plan and the related hassle even before you can think of altering your home security plan.

4. Cleaner look: One very distinctive advantage with wireless home security systems is that they are not at all messy. While a wired security system would have wires running all through your house (unless you want to compromise on your home security), a wireless security system (due to its inherent ‘wireless’ nature) would give a much cleaner look and without any compromises on the security of your home.

5. Extra safe: Wireless security can also be considered safer than the wired security. A wired security system can quickly become un-operational if the wires get severed either due to lack of maintenance or due to intentional tampering by burglars etc. However, wireless home security is difficult to tamper with in that sense (sophisticated thieves/burglars might still be able to tamper low-end wireless security systems using devices that disrupt the wireless signals).

6. Ease of maintenance: A wired security system is as such bulky (since the wires used for a wired security system also form part of the security system). Maintaining a bulky system is generally tougher and needs much more effort than a simple, less bulky one. The wires might need replacements or re-anchoring or re-routing etc. In case you go for a home improvement, your wired security systems might get affected quite a bit. However, with wireless security all these problems are non existent and hence their maintenance is quite easy.

Wireless security is often treated as the most apt answer to the home security concerns. However, the best thing to do is to use a combination of traditional home security techniques together with some of the wireless home security systems.
Wireless home security system

wireless home security system


#Atlanta, #SecuritySystems #SecurityArticles https://www.entryalertproducts.com/wireless-home-security-system/

Voice Alert TXPCBB Specialty Sensor and Transmitter

Voice Alert"s TXPCBB sensor/transmitter adds a new layer of functionality to the Voice Alert System-6 Wireless Annunciator.

The new transmitters enable any type of "sensing device" with output closures to trigger user recorded messages on a Voice Alert base unit receiver/speaker. Now you can get wireless notification from devices such as smoke alarms, CO (carbon monoxide) sensors, window, gate or door contacts, push button devices, water level indicators, a vibration switch or pressure pads ... to name a few. You"ll be instantly notified when an event occurs at the sensing device.

False alarms are eliminated as the TXPCBBs are only triggered when activated by the sensing device. The new sensor/transmitters can be used in a mixed installation environment with our standard PIR (passive infrared) sensors.

The TXPCBB sends a radio signal by input from either Normally Open (NO) or Normally Closed (NC) devices. There is no longer a need to pull cable or trench to receive information from remote sensing devices.

Housed in a water-tight NEMA box, the TXPCBB has a radio transmission range of up to 1000" line of sight or up to 300" through walls. The NEMA box will handle all environments and includes mounting tabs to accommodate a variety of mounting options.

The TXPCBB is powered by a 9V battery. An alkaline battery has a battery life of over one year and a lithium 9V battery will last three to five years. The system includes a "low battery" feature designed to notify the user when a battery voltage approaches a low battery threshold.

Two models are available:

TXPCBB as described above. (This is the product shown on this page)

TXPCBB-V that is triggered by an internal vibration switch. When the TXPCBB-V is bumped or moved it will trigger a signal that will activate a user recorded message from a Voice Alert receiver/speaker. Attach the TXPCBB-V to doors, windows, gates, fences, computers, inventory items, building materials, vehicles and more to be notified if movement occurs. (Special Order)

Wireless Transmitter Instructions #Accessories, #AlarmSystem, #EntryAlerts, #MotionEntry, #VoiceAlert https://www.entryalertproducts.com/product/voice-alert-txpcbb-specialty-sensor/

Long Range Wireless Remote Entry Way Alert - 35 foot Reflective Beam

Wireless remote chime (up to 1500 feet; line of sight transmission distance) entry way alert is activated when person or object passes through the Reflective IR invisible beam. Beam sensor is powered by 12vdc adapter (included) on one side and by (non-powered) beam reflector on other side of entry way. Separation of sensor and reflector can be from 3 feet up to 35 feet (or greater with optional Reflectors). Reflective Beam Entry Way Sensor includes 5 feet of cable and must be wired to 3vdc CR2 battery powered wall-mountable transmitter and included 12vdc adapter (instructions included). Transmitter settings allow one of four tones/chimes to be sent wirelessly up to 1500 feet (line of sight) away to Audible alert receiver with on/off switch and volume control. Chime selection (Classical, Westminster, Ding Dong, Whistle) only sounds twice when something passes through invisible IR beam. Multiple entry ways can be monitored with additional sensors ( item 80-403 ), power supplies ( item 60-300 ) and transmitters ( item 60-105 ). The additional entry ways can be set to individual unique chime settings if desired. Multiple wireless wall/desk receivers ( item 60-609 ) may be used with single or multiple entry transmitters.

When the receiver gets a signal from the transmitter one of 4 different tones (Classical, Westminster Chime, Ding Dong, Whistle) will sound for a few seconds. There is also a volume control so you can set the sound to the desired level. The receiver is also equipped with 4 (one for each zone) NO/NC (24vdc @ 3amps) relays and one 12 VDC (400mA max.) output terminal that can activate when a signal is received. The receiver can be user programmed so the 12VDC terminal and relays will activate for 1 second, 10 seconds, 60 seconds or 10 minutes. The tones will sound for several seconds.

Transmitters/receivers can be set to one of 256 frequency settings to avoid interference with nearby retailers using same system.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

What"s Included:
- Qty 1: Wireless 4 zone, chime selectable, relay output Receiver
- Qty 1: Reflective point to point invisible beam
- Qty 1: 12vdc 500ma transformer for beam
- Qty 1: Long range transmitter

What may be required:
- additional wire; depending on your installation.
- wire connectors - screw-on, butt, crimp, telephone/date/splice, or solder, insulating tape, etc.

Wireless Receiver Instructions

Long Range Transmitter Instructions

Reflective IR Beam Sensor Instructions (supplied 35 feet)
Reflective IR Beam Sensor Instructions (optional 45 feet)

Addendum to Instructions

NOTE: This system is NOT plug"n play installation. Low voltage wiring required (click here for instructions included), product set-up, interconnect and mounting required*.

 * Wire cutting, wire connecting, additional wire, wire connectors, screw drivers (all available at Home Depot, Lowes, Radio Shack, etc.) may all be required depending on your specific installation. This is all low-voltage wiring; however some people may require the services of an electrician, or someone with data/video/audio/telephone/tv wiring experience for proper installation.
Here are the specific instructions on how to interconnect all the items; we will only take returns on this system package (or pieces of it) if they are returned in brand new condition or a specific item is defective and needs replacing.
#AlarmSystems, #EntryAlerts https://www.entryalertproducts.com/product/long-range-wireless-remote-entry-way-alert-reflective-beam/

Tuesday, January 30, 2018

Twin Photobeam Detector, In / Outdoor, Seco-Larm

This device requires separate sounder, alert or chime system (and power supply for sensor and possibly chime). See items 1-9 on our accessories page.

ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.

Product Info sheet
Installation Manual
Manufacturers Web site
Note: Requires separate sounding device and power supply.

NOTE: This device is not a stand alone system or plug"n play installation. Minor low voltage wiring required and additional items required to use.

Features



  • Built-in laser beam alignment system speeds accurate, reliable positioning.

  • Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.

  • Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.

  • Weatherproof, sunlight-filtering case for indoor & outdoor use.

  • Anti-frost system so that beam functions even in extreme conditions.

  • Automatic input power filtering with special noise rejection circuitry.

  • N.C./N.O. alarm output.

  • N.C. tamper circuit included.

  • Non-polarized power inputs.

  • Quick, easy installation with built-in laser beam alignment system.

  • Interruption time adjustable for nearly all situations.

#AlarmSystem, #OutdoorMotionSensor https://www.entryalertproducts.com/product/twin-photobeam-detector-outdoor-seco-larm/

Long Range Wireless Door Contact, UTDC-2500

Additional Magnetic Door Contact and Long Range transmitter for (item 00-210), Wireless Remote Door Entry Alert (UTDCR-2500) #EntryAlerts, #WirelessTransmitter https://www.entryalertproducts.com/product/long-range-wireless-door-contact-utdc-2500/

Monday, January 29, 2018

Wireless Entrance Alert Set Rodann, RX/TX-1000A

The “RX-1000A & TX-1000A Wireless Door Chime Set” is a highly versatile passive infrared (PIR) door announcer that senses the infrared emitted by a person or object crossing through its field of view. The RX-1000A & TX-1000A wireless door chime operates without reflectors or light beam projectors and therefore is immune to false alerts caused by transient light. You can use with door opened or closed. The RX-1000A & TX-1000A Wireless Door Chime is battery powered and does not require electrical wiring. This unique PIR makes the RX-1000A & TX-1000A wireless door chime set the best solution for virtually any installation. It can also be used on warehouse roll up doors, inside display cabinets, restricted area protection, or (patio, bedroom, bathroom) window alerting device.

For more information visit our entry alerts page. #Atlanta, #HomeSecuritySystem #ALERTTYPE https://www.entryalertproducts.com/wireless-entrance-alert-set-rodann-rx-tx-1000a/

Rodann Driveway / Entry Alert Receiver, RX-2000A

The indoor driveway / entry alert receiver has a plug-in 12VDC power supply with a 6 foot cord. The receiver may be placed on a counter top, table or hung on the wall. The electronic LED counter feature allows you to either count customers or count unexpected visitors / vehicles moving in your driveway. There is a reset button next to the counter, when pressed it will zero out the counter. This unit also has six dip-switches on the back of this unit. Numbers 1-4 must match transmitter. Number 5 controls the output of the 12VDC terminals on the back of the receiver with a one second or five second 12VDC output, Number 6 is not used. The terminal screws on the receiver back give you the option of adding a bell, buzzer, horn, siren, strobe or anything that is 12VDC operated. The other speaker terminal (SPKR) screws allow you to add an auxiliary speaker via a wire connection to get the same “Ding Dong” sound as the receiver. A volume control knob adjusts volume on receiver and auxiliary speaker and a different tone is generated depending on which transmitter (zone) is activated. For optimal reception the antenna will swivel 360°.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206. #AlarmSystems, #DrivewayAlert https://www.entryalertproducts.com/product/receiver-for-the-rodann-driveway-entry-alert-rx-2000a/

Wireless Remote Entry Way Alert Chime System w/ 35 feet Beam

Wireless remote chime (up to 2000" line of sight transmission distance) entry way alert is activated when person or object passes through or across IR invisible beam. Beam sensor is powered by 12vdc adapter (included) on one side and by non-powered reflector on other side of entry way (separation of sensor and reflector can be from 1 foot up to 35 feet). Reflective Beam Entry Way Sensor includes 6" of cable and must be wired to 9V battery powered wall-mountable transmitter and included 12vdc adapter (instructions included). Transmitter settings allow one of four tones/chimes to be sent wirelessly up to 2000 feet (line of sight) away to Audible alert receiver with on/off switch and volume control. Chime selection (Classical, Westminster, Ding Dong, Whistle) only sounds twice when something passes through invisible IR beam. Multiple entry ways can be monitored with additional sensors ( item 80-403 ), power supplies ( item 60-300 ) and transmitters ( item 60-105 ). The additional entry ways can be set to individual unique chime settings if desired. Multiple wireless wall/desk receivers ( item 60-509 ) and or pagers ( item 60-103 ) may be used with single or multiple entry transmitters. Included receiver allows external sounders or accessories to be wired via a 12vdc output (400mA for selectable 4 seconds or 10 minutes) on channel/zone 1 and NO/NC relays (24vdc @ 3amps) for each of 4 channels/zones. Transmitters/receivers can be set to one of 256 frequency settings to avoid interference with nearby retailers using same system.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

Accessory power output (for each channel or the 12vdc output) can be increased with an optional 500mA or 1amp 12VDC adapter and/or the output duration time of any of the 4 individual NO/NC channel relays or the 12VDC output can be delayed or extended from 1 second to 60 minutes with the optional Programmable Relay Timer Module - (item 60-440).

Receiver Instructions

Transmitter Instructions

Reflective IR Beam Sensor Instructions

Addendum to Instructions

NOTE: This system is NOT plug"n play installation. Low voltage wiring required (click here for instructions included) and product set-up and mounting required. #ChimeAlert, #EntryAlerts https://www.entryalertproducts.com/product/wireless-remote-entry-way-alert-chime/

Friday, January 26, 2018

Your Guide To Buying Security Cameras

Security Cameras


Today’s technology has made setting up security precautions such as security cameras a cinch! You no longer need to be a millionaire to set up one. You could even install one yourself! Security cameras provide a means for its owner to watch over his or her property from the safety and convenience of any area he chooses. This type of system is a great deterrent to thievery and unwanted entry. Most organizations that have sensitive items or are off limits to the general public employ these cameras to help keep their places safe.

Purchasing and implementing such a system may save your business from the terrors of illegal entry. Investment in such could save you a whole lot of trouble.

Before purchasing a system, you will want to consider the following factors.

Your Needs 

Study your needs. The type of security measures installed will depend on your specific security needs. For example how large is the area you would like covered? How many cameras will it take to monitor this area? You must make sure the security camera system you will purchase can accommodate enough slots for expansion.

Do you need audio too? Some camera systems have audio recording equipment as well so you can not only see what happens, but hear it as well. This is important in cases when you would like everything documented. However, this may be costly. Many establishments only require video records of their security.

Also, you must ascertain whether you need to have your security cameras record in color or black and white. Color cameras are, of course, more sophisticated and show a clearer picture. However, they tend to be pricey. Color cameras might also not work in low-light situations.

Consider the location of the cameras. Will the location be hard to set up a wiring system in? In that case, you may want to consider wireless security camera systems. However, these cameras must be in a place that is conducive to high quality broadcast. There must be no interference. They can, though, be moved around the area. They are a bit more flexible than their fixed-wire cousins.

Will the camera system be for outdoor purposes? Cameras that monitor outdoor locations need special weatherproof housings and may not be recommended for extreme temperatures and various elements. Also those that may be vandalized must be protected against such.

Also, you must take in consideration the lighting for an area. If your camera cannot record a scene due to bad lighting, you will end up with muddy images that won’t help in your surveillance activities. Choose a security camera that has a good sensitivity to light. Also, try to illuminate such areas with external lighting.

You must consider where the power sources will be located. Make sure they are well protected against the elements and from tampering.

Consider the available methods for recording the images. You may use a variety of backup media. And with the advent of computer storage media, even the use of hard disks, compact discs, and DVDs can prove to be an inexpensive way to store your data.

Installing a Security Camera System

Most home security cameras require little wiring, but installation differs according to model. Here are the basic steps:

1. Survey the area to be monitored. Follow the instructions/manual that comes with your security camera product. Install the camera at a proper distance from the area to be surveyed. Cameras vary in the distances from which they focus, so it would do well to pay notice to such.

2. Secure the camera using proper mounts, etc. Make sure that if the camera you are to install should not be moved, its placing should be secure and tamper proof.

4. Connect the camera to the monitor according to the manufacturer’s directions. Make sure the wiring is as hidden and as secure as possible. This will make it harder for vandals and thieves from damaging your wiring.

5. Fine tune your system. Make sure you optimize the images you receive from the camera. Set a maintenance plan and fail safe plans to employ in case your cameras break down.

6 Organize an archival system according to your needs. Backing up and recording your images are implemented here.


Security Cameras
#Atlanta, #SecuritySystems #SecurityArticles https://www.entryalertproducts.com/guide-buying-security-cameras/

Recordable Entry Alert / Motion Alarm

MOTION ALARM AND MOTION DETECTION ALARM SYSTEM


Protect your home, valuables and most importantly - your family with the amazing Sound Sentry XL motion alarm. It"s a portable recordable motion alarm that you can place anywhere, your home, your office, your car - anywhere! This inexpensive motion sensing alarm system has hundreds of uses. It"s also great for Halloween or Christmas greetings on your door!! With the included removable sticky pads and velcro strips you can stick it to any flat surface (such as a wall) or use the included stand to place it on the floor or a table. Press the record button to record any sound, from alarm sounds to dogs barking to a verbal warning - anything you can think of! The sound plays when anything moves within 11 feet of the sensor. Runs on regular "AAA" batteries

The Sound Sentry allows you to record any sound, from Barking Dogs to alarm sounds - even gun cocking sounds!. Doorbells, voice memos, practical jokes - just about anything you can think of. Below is the full instruction guide on how you can make the most of of your Sound Sentry XL!

Using the SOUND SENTRY XL
The Sound Sentry XL has an on/off switch located on the top of the unit. Ensure the unit has 3 AAA batteries installed and the on/off switch is set to "on".

1. To record a new sound hold down the REC button located on the front of the Sound Sentry and speak or use your computer to play your sound effect at least 7 inches away from the microphone in a room with little or no background noise.
2. To stop recording, release the REC button.
3. To test your sound effect move your hand in front of the sensor bubble near the bottom of the unit.

The Sound Sentry has a maximum detection range of about 10 feet so place your unit accordingly.

REPLACING THE BATTERIES*

The Sound Sentry XL uses 3 AAA type batteries. Replace the appropriate batteries when the sound volume begins to decrease or playback is distorted.

1. Remove the screws from the battery compartment cover with a Philip screwdriver.
2. Take out the old or weak batteries and replace with new batteries according to polarity symbols marked inside.
3. Replace the cover, then inset and tighten the screws.

Sound Sentry XL Tricks and Tips
You can turn your Sound Sentry XL into anything from a Barking Dog Alarm to a buzzer alarm (use our free sound library here on the site!), leave messages for your family - it can even be a doorbell - just use a doorbell sound and stick it near your door with the included sticker.
Here are some helpful tricks and tips for recording sounds with your Sound Sentry XL!

1. Make certain when you press the record button your finger/thumb is not covering the microphone area.
2. For cleanest recording use the entire 7 seconds.
3. To force a playback delay play your sound and then record silence until the 7 seconds is up, then release the record button. The Sound Sentry will play the sound and your recorded silence becomes a delay before the sound will play again.
4. Note motion that is very close to the sensor (less than 6 inches) is not easily detected as it obscures the entire sensor area. Effective range is 6 inches to about 11 feet away.
5. It is recommended you do not record into the Sound Sentry XL like a Walkie-Talkie. Best results occur when you record clearly from at least 6 inches away from the microphone. #EntryAlerts, #MotionSensor https://www.entryalertproducts.com/product/recordable-entry-alert-motion-alarm/

Thursday, January 25, 2018

EZ Tone Entrance Alert Door Chime, beige / light gray color

The EZ Tone Door Chime never needs batteries or electricity and it can easily be installed on all types of doors and jambs. When the door is opened, a magnetic striker hits the toned chime bar and produces a pleasant, audible tone. It can be used in both commercial and residential applications. Once installed no maintenance is ever required.

The EZTone is designed for doors that swing only one direction.

Easy instructions, mounting templates and hardware included.

EZTone customers include, Subway, Blockbuster, Winn-Dixie, US Postal Service, Kentucky Fried Chicken, Dollar General Stores, Little Caesars, and many professional offices nationwide. The E-Z Tone Door Chime can usually be installed within 15 minutes, and has a long, maintenance free life.

Instructions #AlarmSystems, #DoorChime https://www.entryalertproducts.com/product/ez-tone-entrance-alert-door-chime-beige/

Universal Transmitter, Multiple Inputs, Dakota Alert UT-2500

The UT-2500 is a simple to use universal transmitter that is compatible with the Dakota 2500 Series products. The UT-2500 operates on a 3 volt lithium battery (included) and has several different methods of activation. The UT-2500 has a push button that can be used as a panic button or a wireless doorbell. There is also a magnetic door/window contact and terminals for both a normally open (N/O) and normally closed (N/C) input. These inputs can be used with any sensor contacts. Now you can have your favorite sensor send a wireless signal up to 1/2 mile back to the DCR-2500 (item 60-609) receiver, depending on environment and terrain.

Manufacturers Instructions #DakotaAlert, #UniversalAlert https://www.entryalertproducts.com/product/universal-transmitter-ut-2500/

Wednesday, January 24, 2018

Voice Alert System 6 – Wireless Motion Sensor Monitor Alert

Voice Alert System-6 is a new annunciator system featuring wireless PIR sensors transmitters and a remote receiver/speaker base unit. Users record their own alert messages and are then notified with their own voice message when activity in a monitored is detected. Key applications include: Wireless Driveway Alarm, Residential and Small Business Security, Child Monitoring and Pool Safety and Home Automation.


For more information visit our entry alerts page.

 

  #Atlanta, #SecuritySystems #ALERTTYPE https://www.entryalertproducts.com/voice-alert-system-6-wireless-motion-sensor-monitor-alert/

Mini Alert Motion Detector - Infrared Sensor Alarm / Chime

This infrared motion detector alarm sounds an 80 db alarm whenever someone comes within the range of the infrared zone.

- The zone detection coverage is 80 degrees horizontally out to 8 meters and 20 degrees vertically.
- 30 second delay allows you to move out of the way before the alarm or chime becomes activated.

Alarm Mode
- It works by means of Passive Infrared motion sensor which it detects a moving human body within a range of 8 meters x 80 degrees.
- The alarm sounds automatically when any human body approaches the detected zone.
- 20 degree vertical coverage allows you to position the alarm so pets will not set off alarm.
- A siren will sound for one minute then shut off automatically and reset itself. Visitor Chime Mode - A pleasant "Ding Dong" melody sounds automatically to greet your visitor when they approach the detected zone.
- Uses 3 "AA" batteries, not included. LED indicator on face of infrared sensor alarm lights up when batteries are low and need replacing.
- Size: 2 3/4" x 1-1/2" x 4-1/2"

WALL MOUNTABLE
Installation
- Mount the adjustable angle wall mount bracket in the desired location with screw and screw anchor (provided).
- Adjust the Mini Alert alarm to the desired detection direction and hold it in position by tightening the screw at the bracket.

This infrared motion sensor alarm works great for announcing vistors to your home or to protect certain areas.

The loud, motion activated alarm alerts you whenever someone breaks into the detection zone. Use at home or use at the office. #InfraredSensor, #MotionDetector https://www.entryalertproducts.com/product/mini-alert-motion-detector/

Tuesday, January 23, 2018

Wireless Entrance Alert Set with focused motion detector, Rodann, RX/TX-1000A

The "RX-1000A & TX-1000A Wireless Door Chime Set" is a highly versatile passive infrared (PIR) door announcer that senses the infrared emitted by a person or object crossing through its field of view. The RX-1000A & TX-1000A wireless door chime operates without reflectors or light beam projectors and therefore is immune to false alerts caused by transient light. You can use with door opened or closed. The RX-1000A & TX-1000A Wireless Door Chime is battery powered and does not require electrical wiring. This unique PIR makes the RX-1000A & TX-1000A wireless door chime set the best solution for virtually any installation. It can also be used on warehouse roll up doors, inside display cabinets, restricted area protection, or (patio, bedroom, bathroom) window alerting device.

NOTE: Receiver color may be WHITE

  • Detects any Motion

  • Infrared Sensor

  • Wireless - Simple Installation

  • Receiver has a volume control and plugs into a wall outlet anywhere up to 500" of the transmitter.

  • Receiver uses 110 Volts

  • Transmitter is battery powered

  • 100% tested at the factory

  • No Reflectors

  • No Light Beams

  • No False Alerts from transient light

  • Up to 500 Foot Range

  • Remote Receiver with Volume Control operates on 110V AC

  • Alerts you with a pleasant electronic chime tone-four sound options

  • Not affected by wind, heat, humidity or shadows

  • Counters available


Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

Product Instructions

  #EntryAlerts, #MotionDetector https://www.entryalertproducts.com/product/entrance-alert-set-rodann-rxtx-1000a/

Optex TD-20U PIR Transmitter

The TD-20U is the battery-powered sensor transmitter for the RCTD-20U (Wireless 2000). The detection pattern is selectable, allowing for a 17 foot fan pattern or 50 foot beam pattern, and sends a signal back to the RC-20U chime box when compromised. The device is powered by a standard 9V battery (not included), and up to nine TD-20U"s can be added to one RC-20U receiver.

The TD-20 Sensor/Transmitter is a PIR detector which will detect both people and vehicles. This weatherproof wireless indoor/outdoor sensor transmitter mounts easily wherever you need to know of people or cars arriving or leaving, and sends a signal back to the Optex RC-20 Receiver (up to 2000") to alert you of visitors. It includes two detection patterns: fan (~17" semi-circle) or long range (at ~50" away from transmitter invisible beam size is 6" x 9" rectangular). The TD-20 is easily mounted behind a tree with its unique mounting capability.

Features

  • Specially designed sensor mounts easily on walls, ceilings, fence posts, desktops, etc.

  • Weatherproof design of sensor allows outdoor use.

  • Two detection patterns: 50ft Long Range and 17ft. Fan Pattern.

  • Detection pattern adjusts easily for perfect aiming.

  • Transmission codes are preset at the factory with over 8 million possibilities, virtually eliminating the possibility of interference or cross-talk.

  • All wireless transmitters have "dead spots" within their transmission range. TD-20"s improved antenna design greatly reduces "dead spots" to make installation easier and increase reliability.

  • 1 RC-20 and up to 4 TD-20 can be installed around your home entrances for perimeter awareness.

#AlarmSystems, #MotionSensor https://www.entryalertproducts.com/product/optex-td20-pir-transmitter/

Monday, January 22, 2018

How Home Security Monitoring Works

Home Security Monitoring


Home security monitoring does not mean that there will be 24 hour a day surveillance of your home to ensure that your home is protected from a burglar. At least it does not mean that in a literal sense but home security monitoring does provide you and your family 24 hour a day protection from burglars and in some cases, even fire. The level of protection that you receive will depend on the complexity of your home security system and the capabilities of the security provider you have chosen. The one thing in home security monitoring that is relatively similar no matter which provider or system you choose is the sequence of events that occur while the security system is in use. This article will provide a brief synopsis of how home security monitoring works.

Just about every home security monitoring system is activated as the first step in the process. Usually the homeowner pushes a button or series of buttons on the keypad to turn on the security system. This sends the message that the security system should trigger if it is breached in any way. Once this happens the various components of the home security system are activated. This may include access contacts, motion detectors, security cameras and any other components of the home security monitoring system. These components remain activated until the homeowner returns home and deactivates the home security monitoring system. Again, this is usually accomplished by typing in a series of numbers in the keypad.

If there is a breach of security, the home security monitoring system will begin a sequence of events. In most cases the first event, upon detecting an intruder, is to sound a warning alarm. This is usually a low level alarm and the intent of sounding this alarm is to allow the home owner the opportunity to deactivate the alarm when they return home. The homeowner usually has approximately 30 seconds to deactivate the alarm before the home security alarm system takes the next step.

If the alarm is not deactivated two things happen simultaneously in the home security system. A loud alarm is sounded and a message is sent to the monitoring station that there has been a breach of security in the home security monitoring system. This message reaches personnel at a 24 hour per day monitoring station who respond to this message. The first response is to contact the homeowner to determine whether or not the home security monitoring system has been breached or it was a false alarm. If the homeowner does not respond to the home security  personnel and supply them with a security password, the staff will contact the local police department and send them to your address.

Home security monitoring is a precise service that has a clear path of action. Most home security companies react and proceed in a very similar fashion when a security system in their network is breached. While each home security  company may have differences they all generally work in the same way.


home security monitoring
#Atlanta, #HomeSecurity #SecurityArticles https://www.entryalertproducts.com/home-security-monitoring-works/

Motion Sensor / Transmitter, Skylink HA-434TL

  • Alerts you when motion is detected surrounding your garage, home or business.

  • Supervised Sensor: monitors the sensors and their battery condition automatically.

  • Motion detecting range: 40 feet.

  • Operating range: up to 800 feet line of sight.

  • Easy to set up.

  • FCC/IC approved.

  • One year warranty.

#MotionSensor, #OutdoorMotionSensor https://www.entryalertproducts.com/product/skylink-alert-motion-sensor-ha-434tl/

Rodann Driveway / Entry Alert Receiver, RX-2000A

The indoor driveway / entry alert receiver has a plug-in 12VDC power supply with a 6 foot cord. The receiver may be placed on a counter top, table or hung on the wall. The electronic LED counter feature allows you to either count customers or count unexpected visitors / vehicles moving in your driveway. There is a reset button next to the counter, when pressed it will zero out the counter. This unit also has six dip-switches on the back of this unit. Numbers 1-4 must match transmitter. Number 5 controls the output of the 12VDC terminals on the back of the receiver with a one second or five second 12VDC output, Number 6 is not used. The terminal screws on the receiver back give you the option of adding a bell, buzzer, horn, siren, strobe or anything that is 12VDC operated. The other speaker terminal (SPKR) screws allow you to add an auxiliary speaker via a wire connection to get the same “Ding Dong” sound as the receiver. A volume control knob adjusts volume on receiver and auxiliary speaker and a different tone is generated depending on which transmitter (zone) is activated. For optimal reception the antenna will swivel 360°.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206. #AlarmSystems, #DrivewayAlert https://www.entryalertproducts.com/product/receiver-for-the-rodann-driveway-entry-alert-rx-2000a/

Friday, January 19, 2018

Seco-Larm Reflective Invisible Beam Sensor, 35 FT

Reflective Photoelectric Beam Sensor. 12VDC or 24VDC power only required at one end of beam; other end of beam is only a reflective mirror. Pre-wired 6 foot cord (extendable).

Typical Applications
– Sensor for garage doors, outdoor gates or overhead doors.
– Sensor for industrial automation to detect objects on manufacturing line.

Note: Requires separate sounding device and power supply.

For more information visit our entry alerts page. #Atlanta, #HomeSecuritySystem #ALERTTYPE https://www.entryalertproducts.com/seco-larm-reflective-invisible-beam-sensor-35-ft/

Electronic Sounder, Extra Loud Siren or Steady Tone Option

This extra loud sounder puts out 90dB at 12VDC drawing only 400mA. Yelp (Siren) or Steady output can be chosen. This item is a great addition to items 00-200, 60-509, 60-609, 60-620, 20-303, 25-302, 25-303, 60-700, 60-740, 25-402, 25-403 when used in industrial manufacturing areas with a lot of background noise. 12VDC, 400mA, 90dB Negative 12vdc input goes to either one of the Black wires. Positive 12vdc input goes to either one of the Yellow wires for Steady Tone or either one of the Red wires for siren. #AlarmSystems, #ElectronicSounder https://www.entryalertproducts.com/product/electronic-sounder-siren-or-steady-tone-option/

Voice Alert System 6 - Wireless Motion Sensor Monitor Alert



Voice Alert System-6 is a new annunciator system featuring wireless PIR sensors transmitters and a remote receiver/speaker base unit. Users record their own alert messages and are then notified with their own voice message when activity in a monitored is detected. Key applications include:



  • Wireless Driveway Alarm

  • Residential and Small Business Security

  • Child Monitoring and Pool Safety

  • Home Automation


System-6 allows a maximum of six user recorded messages. Each message is specific to one zone. For instance, zone one could be for a driveway alarm -“Car coming up the driveway” while zone two could be for a sensor monitoring the back yard- “Alert! Child by the pool!” Perhaps a third sensor guards a side entrance against intruders. However, when this PIR detects movement, the base unit plays “Intruder on patio” and triggers a floodlight using one of four relays included on the base unit. System-6 can monitor all three zones simultaneously and still have three additional zones available when needed. Users can alter their messages and place the wireless sensors wherever they wish.

Voice Alert System-6 sets up in minutes and can be completely customized to fit their individual needs. The wireless PIRs feature: all weather protection, adjustable mounting and sensitivity, and can send a signal 300 feet through walls and up to 1000 feet in open space. Includes the base unit and one wireless sensor. You may add additional sensors (Item# 30-212) to cover up to 6 areas total.

 

Frequently Asked Questions for Voice Alert System

 

Link to manufacturers website for more information

 


Features



  • 6-Zone Monitoring Capability

  • Customized Voice-Recordable Alerts

  • All Weather, Wireless PIR Sensor Transmitters

  • Multiple Beam Patterns for Optimal Detection

  • Adjustable Mounting, Beam Sensitivity, and Delay Timer

  • 4 form "C" Relays to Trigger Additional Devices

#MotionSensor, #VoiceAlert https://www.entryalertproducts.com/product/voice-alert-system-6-wireless-motion-sensor-monitor-alert/

Thursday, January 18, 2018

Curtain / Barrier Photobeam Sensors, Multiple, Seco-Larm

This device requires separate sounder, alert or chime system (and power supply for sensor and possibly chime). See items 1-9 on our accessories page.

These infrared photobeam curtain/barrier sensors are perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited.

Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap is removed.

No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included.

Manufacturers Web site

Note: Requires seperate sounding device and power supply.

NOTE: This device is not a stand alone system or plug"n play installation. Minor low voltage wiring required and additional items required to use. #AlarmSystem, #AlarmSystems https://www.entryalertproducts.com/product/curtain-barrier-photobeam-sensors/

Emergency Alert Strobe / Flashing Light, 12VDC (6~24VDC)







  • For "informative" general signaling requirements

  • Incorrect polarity cannot damage circuit or draw current

  • Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue to function

  • Low current consumption with long operating lifespan of over 300 continuous hours (2,000,000 flashes)

  • Includes choice of amber, blue, clear, or red lens

  • Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic

  • The SECO-LARM strobe light comes with a protective inner cover. This protects the high-voltage xenon tube when the colored lens has been removed

  • Use in temperature ranging from -22ºF (-30ºC) to 140ºF (60ºC)

  • SL-126-A24Q -- For 6- to 24-Volt use







#AlarmSystems, #EmergencyAlert https://www.entryalertproducts.com/product/emergency-alert-strobe-flashing-light-12vdc/

Wednesday, January 17, 2018

Wireless Home Security Systems

Wireless Home Security Systems


Adding wireless home security systems to your home or office can be quite easy as long as you know what you want and how to install them. With just a few simple facts in hand, you can quickly be on your way to finding what you want from the various wireless home security systems.

Prior to choosing wireless home security systems, you must decide a few things.

First you must look over your home to determine how many doors and windows will be used with the system. Next you must determine where you want your control panel and keypads. While some people find it is more convenient to have them close to the front door, others prefer to have them closer to the bedrooms. You can also have them in both places if you so choose.

You must also find out how far these doors and windows are from the system’s main sensors. If you are using wireless home security systems, they cannot be too far from the sensors or else they won’t be able to communicate with them.

Do you want a monitored system? For a small monthly fee, various companies’ can ‘watch’ your system. For a less expensive alternative, you can choose a basic system that connects a dialer to your home phone that can dial previously chosen numbers in the case of an emergency.

Motion detectors are also an option, but you may want to reconsider having them if anyone in your house, including pets, have a tendency to roam during the night or whenever your system is enabled.

Now that you have this information you can begin to look through the various options for wireless home security systems. The first step is contacting a reputable company that you know and trust.

When choosing the correct wireless home security systems model, make sure that you choose a system that monitors every zone in your home. With wireless home security systems you must be certain that it can perform correctly by reaching even the furthest zone.

Lastly, a user-friendly system is a must. If you don’t know how to use wireless home security systems, then they won’t do you much good in an emergency.

Be aware that when choosing wireless home security systems, each contact device takes batteries. It can be a bit pricier then a hard-wired system due to the fact that you must pay for service calls to replace the batteries. But this can be avoided if you buy them and install them yourself.

Speaking of installation, installing wireless home security systems can be quite easy to do yourself since they do not require any hard-wiring, only basic tools that you have lying around your house.

As previously discussed, the first step to installing wireless home security systems is figuring out where to put the control panels and sensors. Once you have done that, you are almost on your way to having your home ready to go in case of an emergency or break-in.

By following the instructions that come with wireless home security systems, you can quickly install your system while saving money. But, if you prefer to have it done for you, you can easily call a contractor, or a company specializing in this type of system, to do it for you.


wireless home security systems
#HomeSecuritySystem, #SecuritySystems #SecurityArticles https://www.entryalertproducts.com/wireless-home-security-systems/

Siren, 15 watts, 12VDC, 110db

15 Watt 12VDC Siren is weatherproof with a 110db sound level. Simply connects to the relay output of an Alert Receiver. Requires 1 Amp adapter (60-301). Cone 3.5" diameter x 4" long. #AlarmSystems, #Siren https://www.entryalertproducts.com/product/siren-15-watts-12vdc-110db/

Voice Alert System 6 - Wireless Motion Sensor Monitor Alert



Voice Alert System-6 is a new annunciator system featuring wireless PIR sensors transmitters and a remote receiver/speaker base unit. Users record their own alert messages and are then notified with their own voice message when activity in a monitored is detected. Key applications include:



  • Wireless Driveway Alarm

  • Residential and Small Business Security

  • Child Monitoring and Pool Safety

  • Home Automation


System-6 allows a maximum of six user recorded messages. Each message is specific to one zone. For instance, zone one could be for a driveway alarm -“Car coming up the driveway” while zone two could be for a sensor monitoring the back yard- “Alert! Child by the pool!” Perhaps a third sensor guards a side entrance against intruders. However, when this PIR detects movement, the base unit plays “Intruder on patio” and triggers a floodlight using one of four relays included on the base unit. System-6 can monitor all three zones simultaneously and still have three additional zones available when needed. Users can alter their messages and place the wireless sensors wherever they wish.

Voice Alert System-6 sets up in minutes and can be completely customized to fit their individual needs. The wireless PIRs feature: all weather protection, adjustable mounting and sensitivity, and can send a signal 300 feet through walls and up to 1000 feet in open space. Includes the base unit and one wireless sensor. You may add additional sensors (Item# 30-212) to cover up to 6 areas total.

 

Frequently Asked Questions for Voice Alert System

 

Link to manufacturers website for more information

 


Features



  • 6-Zone Monitoring Capability

  • Customized Voice-Recordable Alerts

  • All Weather, Wireless PIR Sensor Transmitters

  • Multiple Beam Patterns for Optimal Detection

  • Adjustable Mounting, Beam Sensitivity, and Delay Timer

  • 4 form "C" Relays to Trigger Additional Devices

#MotionSensor, #VoiceAlert https://www.entryalertproducts.com/product/voice-alert-system-6-wireless-motion-sensor-monitor-alert/

Tuesday, January 16, 2018

Household Motion Alert System, Skylink HA-434RTL

Indoor/Outdoor Motion Detector and Garage Door Monitor.
Alerts you when motion is detected surrounding your garage, home or business.
Supervised Sensor: monitors the sensors and their battery condition automatically.
HA-434RL receiver can work with up to 16 sensors in 4 zones.
Comes with Alert and Alarm features.
Built-in piercing 95 dB alarm siren will run for 3 minutes or until muted to reset.
Alert mode has both audio beeping (approx 75db) and visual indicators distinguishing which of 4 zones/channels has the door or window open. Beeping will stop 15 seconds after motion has stopped or when receiver is muted.
Motion detecting range of HA-434TL Indoor/Outdoor Motion Sensor: 40 feet.
Operating range: up to 800 feet line of sight.
Easy to set up.
FCC/IC approved.
One year warranty.

See our entry alerts page for more information.

#EntryAlerts, #MotionDetector #ALERTTYPE https://www.entryalertproducts.com/household-motion-alert-system-skylink-ha-434rtl/

Household Motion Alert System, Skylink HA-434RTL

Indoor/Outdoor Motion Detector and Garage Door Monitor.
Alerts you when motion is detected surrounding your garage, home or business.
Supervised Sensor: monitors the sensors and their battery condition automatically.
HA-434RL receiver can work with up to 16 sensors in 4 zones.
Comes with Alert and Alarm features.
Built-in piercing 95 dB alarm siren will run for 3 minutes or until muted to reset.
Alert mode has both audio beeping (approx 75db) and visual indicators distinguishing which of 4 zones/channels has the door or window open. Beeping will stop 15 seconds after motion has stopped or when receiver is muted.
Motion detecting range of HA-434TL Indoor/Outdoor Motion Sensor: 40 feet.
Operating range: up to 800 feet line of sight.
Easy to set up.
FCC/IC approved.
One year warranty.

See our entry alerts page for more information.

#EntryAlerts, #MotionDetector #ALERTTYPE https://www.entryalertproducts.com/household-motion-alert-system-skylink-ha-434rtl/

EZ Tone Entrance Alert Door Chime, bronze

The EZ Tone Door Chime never needs batteries or electricity and it can easily be installed on all types of doors and jambs. When the door is opened, a magnetic striker hits the toned chime bar and produces a pleasant, audible tone. It can be used in both commercial and residential applications. Once installed no maintenance is ever required.

The EZ Tone is designed for doors that swing only one direction.

Easy instructions, mounting templates and hardware included.

EZ Tone customers include, Subway, Blockbuster, Winn-Dixie, US Postal Service, Kentucky Fried Chicken, Dollar General Stores, Little Caesars, and many professional offices nationwide. The E-Z Tone Door Chime can usually be installed within 15 minutes, and has a long, maintenance free life.

Instructions #AlarmSystem, #DoorChime https://www.entryalertproducts.com/product/ez-tone-entrance-alert-door-chime-bronze/

Monday, January 15, 2018

Optex Wireless Entry Door Contact with Remote Alert Chime, RC20TC10

The Optex wireless remote alert chime can be located up to 500" away line of sight (150" maximum through interior walls or 70" maximum through concrete/steel walls/floors) from the included door opening sensor. Up to 3 door opening sensors (TC-10) can be distinguished with the wireless receiver. Each sensor can activate a unique tone/chime. If only one door sensor is used, user can select 1 of 3 tones / chimes. Alert tone / chime only goes off as follows until door is closed and entry alert system resets itself: (channel 1: single door bell, channel 2: single decreasing warble alert tone, channel 3: five repeated electronic sounds). Volume on the receiver is adjustable. Sensor may activate channel 4 which is a NO / NC (Form "C") relay which can be activated for 1, 5, 30 or 60 seconds or continuous until reset.

Product Demonstration Video:



 

Product Instructions

Features



  • Identifies 4 zones / channels by 3 different tones and LED lights

  • Able to learn 12 sensor codes (each of 4 zones can learn up to 3 transmitters)

  • Over 8 million transmission codes possible, eliminates interference from neighbors

  • Latches into alarm with "Continuous mode" function

  • Adjustable duration for terminal output.

  • Adjustable volume

  • Low battery indicator

  • Receiver powered by 9VDC adapter (included)

  • Sensor can be installed on door/window

  • Sensor can be installed indoors or outside (out of direct rain).

#DoorAlarm, #EntryAlerts https://www.entryalertproducts.com/product/optex-wireless-entry-door-contact-remote-alert-chime-rc20tc10/

Voice Alert System 6 Motion Sensor / Transmitter, VA6000T

Motion sensor for your voice Alert System 6 annunciator (Item #30-211). #AlarmSystems, #VoiceAlert https://www.entryalertproducts.com/product/voice-alert-6-motion-sensor-va6000t/

Friday, January 12, 2018

Optex Wireless 2000 Entry Announcer, RCTD-20U

The Optex Wireless 2000 wireless driveway alarm system comes complete with an infrared driveway sensor with a 2000 foot wireless transmission range*! Use the Optex RCTD-20 to monitor your driveway and alert you to people or vehicles entering your property. The RCTD-20 can also be used to monitor doorways, garage entrances etc.. The infrared motion sensor has a swivel mount enabling it to be used in multiple types of security and monitoring applications! For more information please visit our entry alerts page. #DrivewayAlarm, #HomeSecuritySystem #ALERTTYPE https://www.entryalertproducts.com/optex-wireless-2000-entry-announcer-rctd-20u-2/

Long Range Wireless Door Entry Alert, UTDCDCR-2500

The Door sensor/transmitter has a magnetic door contact, so that when the door is opened by a visitor / customer, it sends a wireless entry alert chime to the DCR-2500 receiver (which is power by an AC adapter and can be plugged in up to 2500 feet away (depending on walls, building materials, etc.). The wireless sensor/transmitter also has a push button that can be used as a panic button, pager signal or a wireless doorbell. There is also terminals for both a normally open (N/O) and/or normally closed (N/C) input. These inputs can be used with any sensor contacts. Now you can have your favorite sensor send a wireless signal up to 1/2 mile back to the DCR-2500 (item 60-609) receiver, depending on environment and terrain.

The DCR-2500 is the receiver for this Long Range Wireless Door Entry Alert. It has four form “C” relay outputs and one 12VDC output. The output durations are adjustable up to 10 minutes. The receiver will play one of four different tunes that are selected at the transmitter so that different zones can be distinguished. The receiver is powered by a 12VDC transformer. It also offers a 5 minute exit delay so you can leave the house without disturbing any occupants as well as a reminder beep and counter function.

System includes quantity 1 (NC) normally magnetic door contact for more difficult installations and/or where the UT-2500 transmitter cannot be mounted on door frame (this 12" wired contact would optionally replace the contact included with transmitter). Up to 4 total wireless long range door contact transmitters can be added, see item 00-211.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

What"s Included:
- Qty 1: Wireless 4 zone, chime selectable, relay output Receiver
- Qty 1: Long range transmitter and built-in magnetic door contact
- Qty 1: NC magnetic contact w/12" wire leads - may not be needed

What may be required:
- additional wire; depending on your installation.
- wire connectors - screw-on, butt, crimp, telephone/data/splice, or solder, insulating tape, etc.

Sensor/Transmitter Instructions

Receiver Instructions

Addendum to Instructions #DoorAlarm, #EntryAlerts https://www.entryalertproducts.com/product/long-range-wireless-door-entry-alert-utdcdcr-2500/

Dakota Alert Wireless Receiver Chime Alert, DCR-2500

The DCR-2500 is the standard wireless receiver and chime alert for the Dakota 2500 Series products. It has four form “C” relay outputs and one 12VDC output. The output duration(s) are adjustable up to 10 minutes. The receiver will play one of four different tunes that are selected at the transmitter so that different zones can be distinguished. The receiver is powered by a 12VDC transformer. It also offers a 5 minute exit delay so you can leave the house without disturbing any occupants as well as a reminder beep and counter function.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

Manufacturers Instructions #AlarmSystems, #Wireless https://www.entryalertproducts.com/product/dakota-wireless-receiver-dcr-2500/

Thursday, January 11, 2018

Multi-Purpose Programmable Timer Relay Module



This timer is easy to setup and use with all of our entry alert and driveway alarm products. Use the timer and optional higher current (500ma or 1 Amp) 12VDC adapter power supply to have higher power drawing accessories (up to 8 amps) activate for a specified length of time immediately after the sensor detects something and the alert receiver outputs an audible or visual alert. Programmable Timer Relay can be used on the 12VDC output of receivers or the Timer Relay can also be used on the Form C relay (NO/NC) channel/zone outputs of receivers to activate an accessory by channel/zone (additional 12VDC adapter power supply required for this application). Or use the timer to add a delay to the accessories activation. Timer activation or delay can be set from 1 second up to 60 minutes. With the easy to understand dip switches and versatility this timer allows you create the exact notification alert delay and or timed output (on) response you want.


 

click for Data Sheet

 

click for Product Instructions
#ProgrammableTimer, #Relay https://www.entryalertproducts.com/product/programmable-timer-relay-module/

12VDC Plug-in Regulated 1.0A Switching Power Supply

AC wall transformer/adapter has a 12VDC 1 AMP output to power our large sirens or multiple accessories. #AlarmSystems, #PowerSupplyAdapter https://www.entryalertproducts.com/product/adapter-12vdc-1-amp/

Wednesday, January 10, 2018

Plug-In Wired Motion Entrance Alert, Rodann AV-200

Quit missing customer entries because your employees either can’t remember, don’t know how, or don’t have the right size batteries to replace in your wireless entrance alert. Plug in the AV-200 hard wired entrance alert system and forget it! can’t The AV200 utilizes a PIR motion detector that picks up the heat & motion of people walking through your door and a will sound either a ‘Ding’ or Ding-Dong’ (you can select) through a speaker that wires into the terminals located on the motion detector. The unit is a DC system that is powered by a plug-in transformer (included). Additional wired Speaker item 25-405 can be added. For more information visit our entry alerts page. #EntryAlerts, #SecuritySystems #ALERTTYPE https://www.entryalertproducts.com/plug-wired-motion-entrance-alert-rodann-av-200/

Multi-Purpose Programmable Timer Relay Module



This timer is easy to setup and use with all of our entry alert and driveway alarm products. Use the timer and optional higher current (500ma or 1 Amp) 12VDC adapter power supply to have higher power drawing accessories (up to 8 amps) activate for a specified length of time immediately after the sensor detects something and the alert receiver outputs an audible or visual alert. Programmable Timer Relay can be used on the 12VDC output of receivers or the Timer Relay can also be used on the Form C relay (NO/NC) channel/zone outputs of receivers to activate an accessory by channel/zone (additional 12VDC adapter power supply required for this application). Or use the timer to add a delay to the accessories activation. Timer activation or delay can be set from 1 second up to 60 minutes. With the easy to understand dip switches and versatility this timer allows you create the exact notification alert delay and or timed output (on) response you want.


 

click for Data Sheet

 

click for Product Instructions
#ProgrammableTimer, #Relay https://www.entryalertproducts.com/product/programmable-timer-relay-module/

Portable Receiver / Pager, Dakota PR-2500

Size 2.5” x 1.25” x .75“
Weight 2.1 oz without battery
Frequency 433.92 MHz
Code Combinations 256
Zones 4
Alert Methods Silent, vibrate, and audible
Memory up to 999 events per channel
Lithium Ion rechargeable battery
Battery charger included

Pager Product Instructions https://www.entryalertproducts.com/product/dakota-alert-pager-pr-2500/

Tuesday, January 9, 2018

Wireless PIR Indoor Motion Sensor, Dakota IR-2500

The IR-2500 is the newest wireless PIR indoor motion alarm from Dakota Alert. With a wireless range of up to 2000 feet* and full compatibility with any of our 2500 Series transmitters or receivers, the IR-2500 will allow you to monitor many indoor locations that were difficult before. The passive infra red detector is able to monitor an area up to 100º wide. With the integral mask, the detection area can be narrowed down to 20º or anywhere in between. With the swivel mount, the IR-2500 sensor can be adjusted right to left up to 80º and up and down up to 50º. With three different sensitivity settings, the IR-2500 can detect a person up to 12 feet, 25 feet or 40 feet away. The sensor can also be set to flash an LED or stay dark when a signal is sent. The IR-2500 is powered by one 9 volt battery and will have a battery life of about 12 months under normal conditions. There is also a low battery alert to notify you when it is time to replace the battery. The IR-2500 is designed for indoor or light duty outdoor applications under an eave or awning or other protected location. Operating range -30º F to 120º F.

Motion Sensor Product Instructions #AlarmSystems, #MotionSensor https://www.entryalertproducts.com/product/indoor-motion-sensor-ir2500/

Entry Way Alert Set. For outdoor or driveway applications, Rodann, RX/TX-2000A

Both transmitter and receiver have antennas that allow 360 degree rotation and pull away from sides of boxes. For best results in communication between transmitter and receiver it is ideal for the antennas to be on the same plane. Example: (If one antenna is pointing up in the vertical position, then the other antenna should be pointing up also. If one antenna is in the horizontal position, then the other antenna needs to be horizontal and pointing at each other for optimum reception). When it comes to distance in communication between transmitter and receiver environmental condition need to be considered. Line of sight without obstacles is ideal. Every tree, bush, fence, car, building in direct line of sight will reduce communication between units. These units should give you approximately 1000’. You may also add additional transmitters to one receiver or additional receivers to one transmitter.

 

TRANSMITTER
The outdoor weatherproof transmitter unit that can be either side or overhead mounted. A 9V replaceable battery is included and is already installed for your convenience. In the back of the unit there are six dip-switches. Numbers 1-4 control the communication security codes that must match the receiver. Numbers 5 & 6 on the transmitter identifies which of up to 4 transmitters (zones) is sending a driveway motion alert. There is an antenna that can rotate for optimal transmission to the receiver up to a realistic 1000 feet away. The driveway beam projection at 25 feet is 1 foot square and at 50 feet it is 2 feet square.

Additional wireless Sensor /Transmitters may be added (item 25-404).
RECEIVER
The indoor receiver has a plug-in 12VDC power supply with a 6 foot cord. The receiver may be placed on a counter top, table or hung on the wall. The electronic LED counter feature allows you to either count customers or count unexpected visitors / vehicles moving in your driveway. There is a reset button next to the counter, when pressed it will zero out the counter. This unit also has six dipswitches on the back of this unit. Numbers 1-4 must match transmitter. Number 5 controls the output of the 12VDC terminals on the back of the receiver with a one second or five second 12VDC output, Number 6 is not used. The terminal screws on the receiver back give you the option of adding a bell, buzzer, horn, siren, strobe or anything that is 12VDC operated. The other speaker terminal (SPKR) screws allow you to add an auxiliary speaker via a wire connection to get the same “Ding Dong” sound as the receiver. A volume control knob adjusts volume on receiver and auxiliary speaker and a different tone is generated depending on which transmitter (zone) is activated. For optimal reception the antenna will swivel 360°.

Additional Receivers: wireless (item 25-403) or wired (item 25-405) may be added.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.

Product Instructions #DrivewayAlert, #EntryAlerts https://www.entryalertproducts.com/product/entry-way-alert-set-rodann-rxtx-2000a/

Monday, January 8, 2018

Wireless Remote Entry Way Alert Chime System w/ 35 Feet Beam

Wireless remote chime (up to 2000′ line of sight transmission distance) entry way alert is activated when person or object passes through or across IR invisible beam. Beam sensor is powered by 12vdc adapter (included) on one side and by non-powered reflector on other side of entry way (separation of sensor and reflector can be from 1 foot up to 35 feet). Reflective Beam Entry Way Sensor includes 6′ of cable and must be wired to 9V battery powered wall-mountable transmitter and included 12vdc adapter (instructions included). Transmitter settings allow one of four tones/chimes to be sent wirelessly up to 2000 feet (line of sight) away to Audible alert receiver with on/off switch and volume control. Chime selection (Classical, Westminster, Ding Dong, Whistle) only sounds twice when something passes through invisible IR beam. Multiple entry ways can be monitored with additional sensors ( item 80-403 ), power supplies ( item 60-300 ) and transmitters ( item 60-105 ). The additional entry ways can be set to individual unique chime settings if desired. Multiple wireless wall/desk receivers ( item 60-509 ) and or pagers ( item 60-103 ) may be used with single or multiple entry transmitters. Included receiver allows external sounders or accessories to be wired via a 12vdc output (400mA for selectable 4 seconds or 10 minutes) on channel/zone 1 and NO/NC relays (24vdc @ 3amps) for each of 4 channels/zones. Transmitters/receivers can be set to one of 256 frequency settings to avoid interference with nearby retailers using same system.

For more information visit our entry alerts page. #DoorChimes, #EntryAlert #ALERTTYPE https://www.entryalertproducts.com/wireless-remote-entry-way-alert-chime-system-w-35-feet-beam/

Entry Alert Beam Chime / Alarm - Invisible Beam Alert 671

You can know when someone "crosses the line". This high tech device creates an invisible infrared beam up to 60 ft. long between the two units. When the beam is crossed a loud alarm or a pleasant chime sound will be emitted. Can be used as an invisible playpen to alert you to your child or pet leaving a safe area. The alarm can also be used at night to scare off would-be intruders. In the chime mode, retail stores in businesses can use it to announce customers and alert them when someone enters an area that is "off limits". You can choose to have the chime sound only one time (when a customer enters a store for example) or the chime can sound continuously until you turn it off (when a customer enters an area that is "off limits" or at home when a child leaves a safe area for example). Distance can be sent to high or low - maximum distance between units is 60 ft. In the chime mode, volume can be set to low, medium, or high. NOTE: both units have included AC adapters and must face each other; the invisible beam or line is between the two units. Only one of the units sounds an alert. Two AC adapters are included. Three AA back-up (only) batteries are not included.

Notes:
- Receiver and Transmitter face each other.
- Both units plug-in to 110VAC on each side of entry way.
- One unit sounds alert signal. #AlarmSystems, #EntryAlerts https://www.entryalertproducts.com/product/entry-alert-beam-chime-alarm-invisible-beam-alert-671/

Door / Window Sensor, Wireless Long Range, WD-434TL



  • Magnetic type contact sensor.

  • Notifies you when your door or window is open.

  • Supervised Sensor: monitors the sensors and their battery condition automatically.

  • Lithium battery included.

  • Operating range: 800 feet.

  • Easy to set up.

  • FCC/IC approved.

  • One year warranty.


#DoorAlarm, #WindowSensor https://www.entryalertproducts.com/product/door-window-sensor-long-range-wd-434tl/

Friday, January 5, 2018

Optex Wireless 2000 Entry Announcer, RCTD-20U

The Optex Wireless 2000 wireless driveway alarm system comes complete with an infrared driveway sensor with a 2000 foot wireless transmission range*! Use the Optex RCTD-20 to monitor your driveway and alert you to people or vehicles entering your property. The RCTD-20 can also be used to monitor doorways, garage entrances etc.. The infrared motion sensor has a swivel mount enabling it to be used in multiple types of security and monitoring applications!


The Optex TD20 infrared sensor and wireless transmitter has two settings for the infrared sensor, fan and long range beam. The fan setting is perfect for door and entrance ways or even as a motion sensor mounted the corned of a room. The beam setting will monitor up to 50 feet in front of the sensor making it ideal for wide driveways, parking lots or even as a perimeter sensor for your property.

Visit our entry alerts page for more information. #EntryAlerts, #SecuritySystems #ALERTTYPE https://www.entryalertproducts.com/optex-wireless-2000-entry-announcer-rctd-20u/

Mini Alert Motion Detector - Infrared Sensor Alarm / Chime

This infrared motion detector alarm sounds an 80 db alarm whenever someone comes within the range of the infrared zone.

- The zone detection coverage is 80 degrees horizontally out to 8 meters and 20 degrees vertically.
- 30 second delay allows you to move out of the way before the alarm or chime becomes activated.

Alarm Mode
- It works by means of Passive Infrared motion sensor which it detects a moving human body within a range of 8 meters x 80 degrees.
- The alarm sounds automatically when any human body approaches the detected zone.
- 20 degree vertical coverage allows you to position the alarm so pets will not set off alarm.
- A siren will sound for one minute then shut off automatically and reset itself. Visitor Chime Mode - A pleasant "Ding Dong" melody sounds automatically to greet your visitor when they approach the detected zone.
- Uses 3 "AA" batteries, not included. LED indicator on face of infrared sensor alarm lights up when batteries are low and need replacing.
- Size: 2 3/4" x 1-1/2" x 4-1/2"

WALL MOUNTABLE
Installation
- Mount the adjustable angle wall mount bracket in the desired location with screw and screw anchor (provided).
- Adjust the Mini Alert alarm to the desired detection direction and hold it in position by tightening the screw at the bracket.

This infrared motion sensor alarm works great for announcing vistors to your home or to protect certain areas.

The loud, motion activated alarm alerts you whenever someone breaks into the detection zone. Use at home or use at the office. #InfraredSensor, #MotionDetector https://www.entryalertproducts.com/product/mini-alert-motion-detector/

Twin Photobeam Detector, In / Outdoor, Seco-Larm

This device requires separate sounder, alert or chime system (and power supply for sensor and possibly chime). See items 1-9 on our accessories page.

ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.

Product Info sheet
Installation Manual
Manufacturers Web site
Note: Requires separate sounding device and power supply.

NOTE: This device is not a stand alone system or plug"n play installation. Minor low voltage wiring required and additional items required to use.

Features



  • Built-in laser beam alignment system speeds accurate, reliable positioning.

  • Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.

  • Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.

  • Weatherproof, sunlight-filtering case for indoor & outdoor use.

  • Anti-frost system so that beam functions even in extreme conditions.

  • Automatic input power filtering with special noise rejection circuitry.

  • N.C./N.O. alarm output.

  • N.C. tamper circuit included.

  • Non-polarized power inputs.

  • Quick, easy installation with built-in laser beam alignment system.

  • Interruption time adjustable for nearly all situations.

#AlarmSystem, #OutdoorMotionSensor https://www.entryalertproducts.com/product/twin-photobeam-detector-outdoor-seco-larm/

Thursday, January 4, 2018

Wireless PIR Indoor Motion Sensor, Dakota IR-2500

The IR-2500 is the newest wireless PIR indoor motion alarm from Dakota Alert. With a wireless range of up to 2000 feet* and full compatibility with any of our 2500 Series transmitters or receivers, the IR-2500 will allow you to monitor many indoor locations that were difficult before. The passive infra red detector is able to monitor an area up to 100º wide. With the integral mask, the detection area can be narrowed down to 20º or anywhere in between. With the swivel mount, the IR-2500 sensor can be adjusted right to left up to 80º and up and down up to 50º. With three different sensitivity settings, the IR-2500 can detect a person up to 12 feet, 25 feet or 40 feet away. The sensor can also be set to flash an LED or stay dark when a signal is sent. The IR-2500 is powered by one 9 volt battery and will have a battery life of about 12 months under normal conditions. There is also a low battery alert to notify you when it is time to replace the battery. The IR-2500 is designed for indoor or light duty outdoor applications under an eave or awning or other protected location. Operating range -30º F to 120º F.

Motion Sensor Product Instructions #AlarmSystems, #MotionSensor https://www.entryalertproducts.com/product/indoor-motion-sensor-ir2500/

Recordable Entry Alert / Motion Alarm

MOTION ALARM AND MOTION DETECTION ALARM SYSTEM


Protect your home, valuables and most importantly - your family with the amazing Sound Sentry XL motion alarm. It"s a portable recordable motion alarm that you can place anywhere, your home, your office, your car - anywhere! This inexpensive motion sensing alarm system has hundreds of uses. It"s also great for Halloween or Christmas greetings on your door!! With the included removable sticky pads and velcro strips you can stick it to any flat surface (such as a wall) or use the included stand to place it on the floor or a table. Press the record button to record any sound, from alarm sounds to dogs barking to a verbal warning - anything you can think of! The sound plays when anything moves within 11 feet of the sensor. Runs on regular "AAA" batteries

The Sound Sentry allows you to record any sound, from Barking Dogs to alarm sounds - even gun cocking sounds!. Doorbells, voice memos, practical jokes - just about anything you can think of. Below is the full instruction guide on how you can make the most of of your Sound Sentry XL!

Using the SOUND SENTRY XL
The Sound Sentry XL has an on/off switch located on the top of the unit. Ensure the unit has 3 AAA batteries installed and the on/off switch is set to "on".

1. To record a new sound hold down the REC button located on the front of the Sound Sentry and speak or use your computer to play your sound effect at least 7 inches away from the microphone in a room with little or no background noise.
2. To stop recording, release the REC button.
3. To test your sound effect move your hand in front of the sensor bubble near the bottom of the unit.

The Sound Sentry has a maximum detection range of about 10 feet so place your unit accordingly.

REPLACING THE BATTERIES*

The Sound Sentry XL uses 3 AAA type batteries. Replace the appropriate batteries when the sound volume begins to decrease or playback is distorted.

1. Remove the screws from the battery compartment cover with a Philip screwdriver.
2. Take out the old or weak batteries and replace with new batteries according to polarity symbols marked inside.
3. Replace the cover, then inset and tighten the screws.

Sound Sentry XL Tricks and Tips
You can turn your Sound Sentry XL into anything from a Barking Dog Alarm to a buzzer alarm (use our free sound library here on the site!), leave messages for your family - it can even be a doorbell - just use a doorbell sound and stick it near your door with the included sticker.
Here are some helpful tricks and tips for recording sounds with your Sound Sentry XL!

1. Make certain when you press the record button your finger/thumb is not covering the microphone area.
2. For cleanest recording use the entire 7 seconds.
3. To force a playback delay play your sound and then record silence until the 7 seconds is up, then release the record button. The Sound Sentry will play the sound and your recorded silence becomes a delay before the sound will play again.
4. Note motion that is very close to the sensor (less than 6 inches) is not easily detected as it obscures the entire sensor area. Effective range is 6 inches to about 11 feet away.
5. It is recommended you do not record into the Sound Sentry XL like a Walkie-Talkie. Best results occur when you record clearly from at least 6 inches away from the microphone. #EntryAlerts, #MotionSensor https://www.entryalertproducts.com/product/recordable-entry-alert-motion-alarm/

Wednesday, January 3, 2018

Door / Window Sensor Alert Kit, Long Range, WD-434RTL

Door/window sensor set - Magnetic type contact sensor -  Notifies you when your door or window is open - Supervised Sensor: monitors the sensors and their battery condition automatically - HA-434RL receiver can work with up to 16 sensors in 4 zones - Comes with Alert and Alarm features - Built-in piercing 95db alarm siren will run for 3 minutes or until muted to reset - Alert mode has both audio beeping (approx 75db) and visual indicators distinguishing which of 4 zones/channels has the door or window open - Beeping will only stop when door/window is closed or mute button is pressed on receiver - Both audio and visual indicators - Easy to set up - FCC/IC approved - One year warranty.

ADDITIONAL Uses include: Front Door, Windows, Bedroom Windows, Patio Door

WD-434RTL Includes:
** One HA-434RL Household Alert® Receiver (AC/DC adapter included).
** One WD-434TL Door / Window Sensor (Lithium Battery included)

Visit our entry alerts page for more information #DoorAlert, #WindowAlert #ALERTTYPE https://www.entryalertproducts.com/door-window-sensor-alert-kit-long-range-wd-434rtl/

Mini Alert Motion Detector - Infrared Sensor Alarm / Chime

This infrared motion detector alarm sounds an 80 db alarm whenever someone comes within the range of the infrared zone.

- The zone detection coverage is 80 degrees horizontally out to 8 meters and 20 degrees vertically.
- 30 second delay allows you to move out of the way before the alarm or chime becomes activated.

Alarm Mode
- It works by means of Passive Infrared motion sensor which it detects a moving human body within a range of 8 meters x 80 degrees.
- The alarm sounds automatically when any human body approaches the detected zone.
- 20 degree vertical coverage allows you to position the alarm so pets will not set off alarm.
- A siren will sound for one minute then shut off automatically and reset itself. Visitor Chime Mode - A pleasant "Ding Dong" melody sounds automatically to greet your visitor when they approach the detected zone.
- Uses 3 "AA" batteries, not included. LED indicator on face of infrared sensor alarm lights up when batteries are low and need replacing.
- Size: 2 3/4" x 1-1/2" x 4-1/2"

WALL MOUNTABLE
Installation
- Mount the adjustable angle wall mount bracket in the desired location with screw and screw anchor (provided).
- Adjust the Mini Alert alarm to the desired detection direction and hold it in position by tightening the screw at the bracket.

This infrared motion sensor alarm works great for announcing vistors to your home or to protect certain areas.

The loud, motion activated alarm alerts you whenever someone breaks into the detection zone. Use at home or use at the office. #InfraredSensor, #MotionDetector https://www.entryalertproducts.com/product/mini-alert-motion-detector/

Tuesday, January 2, 2018

Mini Alert Motion Detector - Infrared Sensor Alarm / Chime

This infrared motion detector alarm sounds an 80 db alarm whenever someone comes within the range of the infrared zone.

- The zone detection coverage is 80 degrees horizontally out to 8 meters and 20 degrees vertically.
- 30 second delay allows you to move out of the way before the alarm or chime becomes activated.

Alarm Mode
- It works by means of Passive Infrared motion sensor which it detects a moving human body within a range of 8 meters x 80 degrees.
- The alarm sounds automatically when any human body approaches the detected zone.
- 20 degree vertical coverage allows you to position the alarm so pets will not set off alarm.
- A siren will sound for one minute then shut off automatically and reset itself. Visitor Chime Mode - A pleasant "Ding Dong" melody sounds automatically to greet your visitor when they approach the detected zone.
- Uses 3 "AA" batteries, not included. LED indicator on face of infrared sensor alarm lights up when batteries are low and need replacing.
- Size: 2 3/4" x 1-1/2" x 4-1/2"

WALL MOUNTABLE
Installation
- Mount the adjustable angle wall mount bracket in the desired location with screw and screw anchor (provided).
- Adjust the Mini Alert alarm to the desired detection direction and hold it in position by tightening the screw at the bracket.

This infrared motion sensor alarm works great for announcing vistors to your home or to protect certain areas.

The loud, motion activated alarm alerts you whenever someone breaks into the detection zone. Use at home or use at the office. #InfraredSensor, #MotionDetector https://www.entryalertproducts.com/product/mini-alert-motion-detector/