Vehicle Alert Hose Sensors

Looking for a driveway vehicle alert sensor? The DCRH-2500 is a very reliable and easy to install driveway alarm. The transmitter operates on one 9-volt battery and has 25" of 3/8" diameter exterior hose that will lie across the drive. When a vehicle drives over the hose, a signal will be sent to the DCR-2500 receiver up to 1/2 miles away*

The transmitter is weatherproof and meant for exterior locations. Up to 4 zones can be monitored with additional transmitters. The transmitters can be programmed so they will each sound a different tone at the receiver.

The DCR-2500 receiver plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level. The DCR-2500 is equipped with four form “C” relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and relays can be set to activate for 1 second, 10 seconds, 60 seconds or 10 minutes, if this is desired. The tones will still sound for several seconds.

[av_button label="See More Like This" link="manually,https://www.drivewayalertsystems.net/products/vehicle-alert-hose-sensor-dcrh-2500" link_target="_blank" size="x-large" position="center" icon_select="yes" icon="ue835" font="entypo-fontello" color="theme-color" custom_bg="#444444" custom_font="#ffffff" admin_preview_bg=""]

#AirHoseSensor, #AlertSensors, #DrivewayAlarms #DrivewayAlarms, #EntryAlerts http://ezcyberquest.com/vehicle-alert-hose-sensors/