This infrared motion detector alarm sounds an 80 db alarm whenever someone comes within the range of the infrared zone.
- The zone detection coverage is 80 degrees horizontally out to 8 meters and 20 degrees vertically.
- 30 second delay allows you to move out of the way before the alarm or chime becomes activated.
Alarm Mode
- It works by means of Passive Infrared motion sensor which it detects a moving human body within a range of 8 meters x 80 degrees.
- The alarm sounds automatically when any human body approaches the detected zone.
- 20 degree vertical coverage allows you to position the alarm so pets will not set off alarm.
- A siren will sound for one minute then shut off automatically and reset itself. Visitor Chime Mode - A pleasant "Ding Dong" melody sounds automatically to greet your visitor when they approach the detected zone.
- Uses 3 "AA" batteries, not included. LED indicator on face of infrared sensor alarm lights up when batteries are low and need replacing.
- Size: 2 3/4" x 1-1/2" x 4-1/2"
WALL MOUNTABLE
Installation
- Mount the adjustable angle wall mount bracket in the desired location with screw and screw anchor (provided).
- Adjust the Mini Alert alarm to the desired detection direction and hold it in position by tightening the screw at the bracket.
This infrared motion sensor alarm works great for announcing vistors to your home or to protect certain areas.
The loud, motion activated alarm alerts you whenever someone breaks into the detection zone. Use at home or use at the office. #InfraredSensor, #MotionDetector http://www.entryalertproducts.com/product/mini-alert-motion-detector/
Friday, December 8, 2017
Mini Alert Motion Detector - Infrared Sensor Alarm / Chime
Long Range Wireless Point to Point Entry Alert - Twin Photobeam, up to 90 feet
Wireless remote (up to 1500 feet; line of sight transmission distance) entry way alert or alarm is activated when person or object passes through the invisible line between the twin photobeam sensor (transmitter) and receiver. Twin photobeam requires power at each end of invisible beam (power adapters included). Separation of photo beam units can be from 3 feet up to 90 feet (or greater with optional Photobeams - contact us). Photobeam Sensor Receiver must be wired to 3vdc CR2 battery powered wall-mountable long range transmitter and included 12vdc adapters (instructions included). Transmitter settings allow one of four tones/chimes to be sent wirelessly up to 1500 feet (line of sight) away to Audible alert receiver with on/off switch and volume control. Chime selection (Classical, Westminster, Ding Dong, Whistle) only sounds twice when something passes through invisible photo beam. Multiple entry ways can be monitored with additional sensors ( item 80-402 ) or similar, power supplies ( item 60-300 ) and transmitters ( item 60-105 ). The additional entry ways can be set to individual unique chime settings if desired. Multiple wireless wall/desk receivers ( item 60-609 ) may be used with single or multiple entry transmitters.
When the receiver gets a signal from the transmitter one of 4 different tones (Classical, Westminster Chime, Ding Dong, Whistle) will sound for a few seconds. There is also a volume control so you can set the sound to the desired level. The receiver is also equipped with 4 (one for each zone) NO/NC (24vdc @ 3amps) relays and one 12 VDC (400mA max.) output terminal that can activate when a signal is received. The receiver can be user programmed so the 12VDC terminal and relays will activate for 1 second, 10 seconds, 60 seconds or 10 minutes. The tones will sound for several seconds.
Transmitters/receivers can be set to one of 256 frequency settings to avoid interference with nearby retailers using same system.
Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206.
What"s Included:
- Qty 1: Wireless 4 zone, chime selectable, relay output Receiver
- Qty 1: Twin Photobeam Sensor - sender (transmitter) & receiver require power - up to 90 foot separation
- Qty 2: 12vdc 500ma transformer for Twin Photo beam
- Qty 1: Long range transmitter
- Qty 1: 5 feet+, 2 conductor wire for wireless transmitter
What may be required:
- additional wire; depending on your installation.
- wire connectors - screw-on, butt, crimp, telephone/date/splice, or solder, insulating tape, etc.
Wireless Receiver Instructions
Long Range Transmitter Instructions
Twin Photobeam Detector, 90 feet max.
Addendum to Instructions
NOTE: This system is NOT plug"n play installation. Low voltage wiring required (click here for instructions included), product set-up, interconnect and mounting required*.
* Wire cutting, wire connecting, additional wire, wire connectors, screw drivers (all available at Home Depot, Lowes, Radio Shack, etc.) may all be required depending on your specific installation. This is all low-voltage wiring; however some people may require the services of an electrician, or someone with data/video/audio/telephone/tv wiring experience for proper installation.
Here are the specific instructions on how to interconnect all the items; we will only take returns on this system package (or pieces of it) if they are returned in brand new condition or a specific item is defective and needs replacing. #EntryAlerts, #WirelessTransmitter http://www.entryalertproducts.com/product/long-range-wireless-point-to-point-entry-alert-twin-photobeam-90-feet/
Thursday, December 7, 2017
Receiver for the Rodann Entrance Alert Set, RX-1000A
Extra Receiver for the Rodann® Entrance Alert Set, RX-1000A.
Optional Extra Loud indoor Siren or Steady Tone Electronic sounder available for high noise areas, see item 60-206. http://www.entryalertproducts.com/product/receiver-for-the-rodann-entrance-alert-set-rx-1000a/
Voice Alert Wireless Door Entry Announcer, VA6DEA
Voice Alert System-6 allows voice-recorded messages to identify activity for up to six monitored zones. The Voice Alert System-6 uses wireless sensors (contact closure / motion / etc.) that send a wireless signal up to 1000" line of sight (or up to 300" inside) to an indoor receiver/speaker (Base Unit).
When a wireless sensor is activated a radio signal is sent from the wireless transmitter to the remote Base Unit. A custom message, which you"ve recorded in your own voice for that specific zone, is played on the Base Unit. One of four form "C" relays (NO/NC dry on/off switches) attached to the Base Unit can optionally be triggered (see example below). With its ability to secure up to six separate zones, each with its own customized recorded message in your own voice, Voice Alert is the most flexible system available.
Users can place the wireless transmitter sensors wherever needed and alter their recorded messages at any time. Voice Alert System-6 sets up in minutes and can be completely customized to handle tough wiring situations. Multiple base units may also be used to trigger alerts in two or more areas simultaneously.
The TXPCBB transmitter sends a radio signal by input from either Normally Open (NO) or Normally Closed (NC) devices. An included magnetic door contact sensor with 2" of wire is included. The small magnet mounts on the door and the small wired sensor mounts opposite the magnet on the door frame and it connects (via the included 2" of wire) to the NC (normally closed) terminals on the transmitter.
The transmitter box is housed in a water-tight NEMA box, the TXPCBB has a radio transmission range of up to 1000" line of sight or up to 300" through walls. The NEMA box will handle all environments and includes mounting tabs to accommodate a variety of mounting options.
The TXPCBB transmitter is powered by a 9V battery. An alkaline battery has a battery life of over one year and a lithium 9V battery will last three to five years. The system includes a "low battery" feature designed to notify the user when a battery voltage approaches a low battery threshold.
Manufacturer"s Website
Receiver Instructions
Wireless Transmitter Instructions #AlarmSystem, #MotionEntry, #VoiceAlert http://www.entryalertproducts.com/product/voice-alert-wireless-door-entry-announcer-va6dea/
Whistle Alert, Electronic, 12VDC
Mini Whistle for annunciation in remote areas, simply connects to a 12 Volt output of the any Alert Receiver or requires a minimum 500 ma adapter (60-301) if used on the relay output of a receiver. 0.87" diameter x 0.37" high.
The whistle can also be installed in any alarm or doorbell system that uses 2-strand doorbell wire. When activated, it sounds a loud whistle for approximately 4 seconds.
- Sounds loud whistle for 4 seconds when activated
- Red and black leads connect to 12VDC output
Wednesday, December 6, 2017
Long Range Wireless Door Contact, UTDC-2500
Additional Magnetic Door Contact and Long Range transmitter for (item 00-210), Wireless Remote Door Entry Alert (UTDCR-2500) #EntryAlerts, #WirelessTransmitter http://www.entryalertproducts.com/product/long-range-wireless-door-contact-utdc-2500/